The installation method of intelligent turbine flowmeter, which is a main type of impeller flowmeter, consists of sensors and conversion display instruments. It is widely used to measure the liquid in closed pipes, but the liquid must not corrode with stainless steel or cemented carbide. There are no fibers and particles in the medium. Here are some notes on the installation of turbine flowmeters.
The installation method of the intelligent turbine flowmeter is installed in three ways: flange connection, screw connection, and clamping. The direction of liquid flow during installation shall be consistent with the direction of the arrow indicating the flow direction on the sensor housing, and the upstream straight pipe section shall be greater than or equal to 20 times the pipe diameter, and the downstream straight pipe section shall be greater than or equal to 5 times the pipe diameter.
The sensor of the instrument should be kept away from the external magnetic field. If it cannot be avoided, the necessary measures should be taken. In order not to influence the normal delivery of liquids during inspection, bypass pipes should be installed outside the straight pipe sections at both ends of the sensor. When the sensor is installed in the open air, it must be waterproofed. Wiring of sensors and display instruments should be based on the power of the amplifier to select the wiring.
The liquid turbine flow sensor can be installed horizontally and vertically, and the fluid must be up when it is down. The liquid should be filled with pipes and there should be no bubbles. When installed, the direction of liquid flow should be consistent with the direction of the arrow on the sensor housing indicating the direction of flow. The inner wall of the straight pipe section should be smooth and clean, with no dents, fouling, and peeling defects.
Intelligent turbine flowmeter installation method As an ideal instrument for flow measurement, turbine flowmeters have been widely used in the industry. The correct installation method is a prerequisite to ensure the normal operation of the instrument, and it is convenient for future maintenance and repair. The life of the meter is longer.
FHM fence factory provides a variety of Garden Landscape Staples for your supplying chain/warehouse.You could have a multiple choice here.
[Strong and Durable]Stainless steel constructed garden long staples are wear-resistant, heat-resistant, durable and not easy to corrode/rust.
[Easy Insertion]Sharp bevelled edge points for easy penetration, even for some thick fabrics.
[Stable]It is sturdy after stick on the earth and hard to remove ,has good stability.
[Easy to Use]Comes with 100 pieces a set so it is very convenient and practical.
[Wide Application]Used to hold down weed barrier fabric, erosion control fabrics, fly net, sunshade net, artificial grass, drip tape or tubing.
Garden Landscape Staples
Garden Landscape Staples,Garden Staples,Landscape Staples,Landscape Fabric Staples
DINGZHOU FEIHONG METAL MESH CO.,LTD , https://www.fhmfencing.com
![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)