![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
We all knowledge wallpaper is a kind of decoration materials for home decoration, can play a role in beautifying and decorating the interior. However, poor wallpaper installation will affect the aesthetic effect of the entire family. This article will introduce the construction process of the wallpaper and the matters that should be paid attention to in the construction process of the wallpaper. Let's take a look with the Xiaobian.
First of all, let's see which tools we need to prepare for wallpapering:
Tools to be used for wallpapering: buckets, rulers, tape measures, cutting knives, scrapers, towels, brushes, sponges, ladders, hanging wires, rollers.
Next we look at the entire construction process of the wallpaper:
1. Measure the height and width of the wall with a tape measure to cut the wallpaper. Note that the wall must be flat and clean. Do not stain it. Use sandpaper to sand it.
2. To adjust the base film, the role of the base film is to protect the wall, to ensure that the wallpaper paste effect. The base film package is opened, poured into the container, then poured into 1:1 water, stir well, and then placed for 5 minutes. Note that water is not much and should not be over-diluted.
3. Brush the base film and use the roller to evenly brush the base film onto the wall. After brushing the base film, wait for one hour to dry. Pay attention to brushing from the bottom up to prevent the base film from splashing. Waste newspapers, to prevent contamination of the floor, it is recommended to brush 2 or more times.
4. Trim the wallpaper. Note that before trimming the wallpaper, first check the model number on the wallpaper label, whether the batches are the same, check the flower type, whether the color has color difference, and the color difference of the same model and the same batch of products is smaller. When you need to replenish the label to save the wallpaper, you can contact the seller if there is a product with the same batch. Tailor wallpapers. The length of a single piece is 10 cm longer than the wall, and space is reserved. Note that for flower wallpapers, neat flowers are needed. After you cut the wallpaper, lay it on a clean surface.
5. Adjust the wallpaper glue, first prepare 3.5 litres of water, first stir the water, make the water flow quickly, and then slowly pour into the powder, so that the powder can be uniform, not easy to agglomerate. After stirring evenly, wait for 5 minutes and allow the powder to soak. In winter, it is best to use warm water, and the effect is good. After 5 minutes, pour in glue and stir evenly for 2 minutes.
6. Prepare the wall surface. Before brushing the base film, it is necessary to remove the switch case, and the wallpaper is attached and reinstalled so that there is no flash and the effect is better. Hang the line to ensure that the first wallpaper is perpendicular to the ground. The position of the hanging line is 50 cm from the door, less than the width of the wallpaper (53 cm), and 3 cm is reserved. Reminder: There is no professional hanging wire tool. Heavy objects can be used to hang on the rope and play the same role. The hanging wire mark can't use the pen to leave a stain. Just use a knife to mark out the mark.
7. Brush glue. First brush, brush the wall edge, corner, etc., where the roller is not easy to brush, then use a roller to brush a large area, note that not all wallpapers are glued to the wall (pure paper substrate wallpaper needs Put the glue brush on the back of the wallpaper, the wallpaper of the non-woven substrate needs to put the glue brush on the wall). If you are slow to paste, you can brush a part of the paste, not all brush, so as not to paste, the glue dry, need to brush the second time.
8. Paste the wallpaper. Tip: Before re-sticking the wallpaper, you can first spread the wallpaper on the ground to the flowers, according to the order of 1234 good wallpaper, then paste on the wall, to prevent the right and wrong flowers appear. Paste the wallpaper from top to bottom, scrape with a scraper, leave a margin on the top, then cut it off to ensure it is attached to the side. Pay attention to the processing method of the switch socket, leave margin on the corners, and then use the knife to cut off, the joints should be forced to press, to prevent the edge, the place where the flowers are not uniform, you can push a little by hand, where the glue is not enough, you need Replenish glue, excess glue spilled, wipe off in time with wet towel or sponge.
9. Dries wallpaper. After the wallpaper is attached, you must close the doors and windows, let the wallpaper dry naturally, avoid the ventilation and exposure, so you can avoid the wallpaper Alice, bubbles and other phenomena. Reminder: If there are still air bubbles after the shade, you can use a needle to pierce the air bubbles to smooth out the dirt. If the area of ​​the bubble is large, the glue is not brushed in. The glue can be injected with a syringe and then wiped.
Then the wallpaper construction should pay attention to what matters:
1. Before construction, you should carefully check whether the color number and batch number of the wallpaper are the same. In addition, the wallpaper needs to be applied to the flowers. The plain wallpaper needs to be constructed in the forward and reverse directions.
2, the quality of the glue will directly affect the overall effect of the wallpaper and the use of years, so you need to buy authentic brand of glue, Youli Europe's wall covering glue is a good choice.
3, some wet backlit walls sometimes have a layer of mold, it is best to use sterile water to clean it again.
4, the back of the wallpaper with glue can not be rolled into the water in order to avoid adhesion.
5. In the event of a yin angle, the weight hammer should be hoisted starting from 10 centimeters away from the inside corner of the house to prevent deviation.
6, with a pattern of wallpaper, from the center of the wall and the eyes to the same height of the beginning of the flower, generally from the two cutting edge combination to align the repeating pattern.
7. During the construction of plain paper wallpaper, it is not possible to scratch and wipe the glue on the paper surface to avoid contaminating the surface of the wallpaper.
8, when the wall needs to hang oil paintings or other accessories, nails should be nailed on the wallpaper draw a "V" shape for future repair.
9. Do not open the windows and doors during construction and within 24 hours after construction. Ventilation over the General Assembly cause the wallpaper to drastically dry and shrink, resulting in cracking at the joints.
10. It is recommended not to use varnish (varnish) for wall treatment. The varnish will not only prevent moisture but will affect the stickiness of wallpaper and walls. Poor quality varnish also emits harmful substances that harm human health.
11, each model in the construction of the first test paste 1-2 rolls, until the glue is slightly dry to observe whether there is color, joints and other quality problems, check no problem and then continue construction. If any quality problems are found, immediately stop the construction, identify the reasons, and contact the supplier in a timely manner.
Xiao Bian concludes: On the wallpaper construction process and precautions are introduced here, I hope to be helpful to everyone. If you want to know more related information, you can pay attention to this website information.
Wallpaper maintenance environmental wallpaper home wallpaper flag air wallpaper 3d wallpaper background wall
Kylin Chemicals manufactures and markets high quality chelants and sequestrants, including EDTA, Tetrasodium EDTA,EDTA Disodium salts, EDTA Tetrasodium salt, HEDP, PBTC, ATMP and DETPMP, etc.
Our sequestrants are widely used in variety of applications like detergents & cleaners, cosmetics, industrial water treatment, oilfield water treatment, textile dyeing, etc.
EDTA Chelants & Phosphonate Sequestrants
Edta Chelation,Phosphonate Sequestrants,Ethylenediaminetetraacetic Acid,Phosphino Polycarboxylic Acid
Kylin Chemicals Co., Ltd. , http://www.kylin-chemicals.com