What are the characteristics and disadvantages of the overall wardrobe using particle board?


Xiao Bian here for the majority of consumers to explain as follows.
1. Process: Also known as solid wood particle board, it is processed into certain specifications by using small diameter wood, wood processing leftovers (such as board, truncated, wood chips, shavings, sawing, etc.), cutting residues or other plant materials. The scraps or shavings, and the application of adhesives, through the paving and hot-pressed plates, and therefore also become particle board.
2.Characteristics: It is made of mixed wood, low cost, effective saving of resources, improving the utilization rate of wood. The width of the single board is large and can be processed into large panel parts according to the demand; the structure is uniform, vertical and horizontal, and easy to machine and manufacture; No need to dry, easy to store
3, Disadvantages: low flat tensile strength, resulting in easy to break the plate, the middle of the plate is prone to deformation; the internal particles are large, the water absorption thickness expansion rate is high, resulting in easy deformation after moisture absorption; grain structure leads to rough edges, edges easily fall off; The gap between the particles of the core material is relatively large, and the internal structure of the plate is “close to the top and loose at the middle” and is not conducive to processing; the nail holding power is poor, and the furniture made of the particle board is not suitable for secondary disassembly and assembly.
In short, the whole wardrobe made of particleboard has good quality and lack of one side. Specific consumers can choose according to their personal spending power and preferences, to ensure that the whole wardrobe they buy is suitable for the decoration work of their own room, and To a certain extent, it can show personality characteristics.

Overall Wardrobe Renovation Carpentry Knowledge Renovation Material Knowledge Decorative Furniture


Steel widely used, variety, depending on the cross-sectional shape, generally divided into steel profiles, sheet, pipe and metal products of the four categories. Steel is thematerial of steel ingot, billet or steel processing by pressure a certain shape, size and performance made of. Most steel processing are by pressure processing, to be processed steel (billet, ingot, etc.) plastic deformation. According to the differenttemperature steel processing, it can be divided into two kinds of cold and hot working.

Steel Material

Steel Material, Iron Plate, Stainless Steel Plate, Round Tube

Hebei Dongshengyuan Trading Co.,Ltd. , http://www.wiremeshdsy.com

Posted on