![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The tiles are waterproof, anti-corrosive, colorful, and easy to clean. They are very suitable for the decoration of the bathroom. However, the tiles in the bathroom are prone to various problems during the process of laying, which not only affects the quality of the tile, but also causes serious problems such as water leakage in the future. Therefore, the bathroom tiles need to be paid attention to when laying. The following small series will introduce the ten points worth noting when the bathroom is tiled. Let's take a look.
One of the ten notes in the bathroom tile paving: the problem of leaving the seam
The seams of the bathroom tiles should not be too small, the seams of the tiles are too small to reduce the service life of the tiles, and the tiles are squeezing the glaze when they are subjected to thermal expansion and contraction.
Suggestion: Whether it is a seam tile or a seamless tile, you must pay attention to the seam during construction. The polished tiles are generally 1mm, the tiles are 2-5mm, and the antique tiles are 5-8mm.
Bathroom tile paving ten notes two: caulking problem
Nowadays, many workers start to sew immediately after the bathroom tiles are laid. This is very inappropriate. Because the tiles are not completely dry, it is easy to cause the tiles to loosen during the jointing process. The tiles fall off, leaving a safety hazard.
Recommendation: Tile joints are made after the tiles have dried. Usually any time after 24 hours is fine.
Ten tiles in the bathroom tile: three to clean before laying tiles
Some irresponsible construction teams spliced ​​the walls of the putty on the wall when laying the wall tiles. The slabs were directly spliced ​​without shoveling the putty. The safety hazard of this approach is very large. The cement can't be hanged on the putty, which is easy to cause the tiles to fall off. This is also very unsafe!
Recommendation: The wall must be inspected before tiling. If the wall has cracks, it must be treated first and the wall cleaned.
Bathroom tile paving ten note four: protection problem after tile paving
Tiles are protected when paving, do not scratch the brick surface, pollute the brick surface. Walking on the brick surface without dry solids, painting on the wall surface, and not using a protective film on the paint floor often occur during the construction process, which will cause damage to the tile.
Ten tiles in the bathroom tile paving: processing problems of tile paving
Especially when the wall tiles touch the sun angle, be careful when grinding the edges. Do not damage the glaze layer of the tiles. Pay attention to the gaps when linking, not too small.
Bathroom tile paving ten note six: tile falling off problem
When paving wall tiles, cement mortar is used as the bonding agent. The wall bricks have high water absorption rate. If the water is not soaked beforehand, the porous ceramic tiles after the paving should absorb the moisture in the cement mortar. Cement requires a lot of water during the curing process. Since it loses water, it has no adhesive force and no strength. The bricks are accompanied by cement mortar and fall off the wall together.
Ten tiles in the bathroom tile paving: quality problems in the construction of tiles
If the decoration company has problems with the quality of the tiles during construction, it is necessary to communicate with Party A in a timely manner.
Eight of the bathroom tiles are laid out: Eight plan before the paving
Many construction workers started to shop when they got the bricks. When they reached a certain level, they found that the tiles were not well-formed and the proportions were not coordinated. Therefore, they were removed and re-paved, resulting in unnecessary loss and waste.
Suggestion: Make a plan for laying bricks before paving.
Nine notices for bathroom tiles: mortar ratio
In order to prevent the concrete from shrinking too much and causing a large tensile stress to crack the tile, it is advisable to use a low-grade cement 325 or below, 1:3 cement mortar to lay the tile.
Ten tile notes for bathroom tiles: soaking water on demand
It is now common to see some customers returning unused tiles, and found that some can't be returned because the tiles are soaked in water. Today's manufacturers or businesses generally can not be returned, if there are no used tiles, this will cause unnecessary waste.
Suggestion: How much foam is needed, how much foam can be used for construction, not all foaming at one time, soaking water should be combined with the construction progress of workers.
Xiaobian summary: Speaking so much, then the bathroom tile paving ten pay attention to you get it? No more to watch it!
AU Optronics Corp. (hereafter called AUO). AUO is the world's largest liquid crystal display (TFT-LCD) design, development, manufacturing and marketing company. Au Optronics is listed on the Taiwan Stock Exchange. AUO delivers advanced display integration solutions with innovative technologies, including 4K2K ultra-high resolution, 3D, ultra-thin, narrow bezels, transparent displays, LTPS, OLED, and touch solutions. AUO also has the most complete generation of production lines from 3.5G, 4G, 4.5G, 5G, 6G, 7.5G to 8.5G, providing a wide range of LCD applications in the size range of "1.2 to 71" TFT-LCD Panel. AUO is the world's leading TFT-Lcd Panel manufacturer, with a 16.2% market share for large-size panels. Au is committed to providing customers with a highly value-added portfolio of innovative products, utilizing the competitive edge of a complete generation of production lines, flexible adjustment and development of a variety of application products to further grasp the market opportunities and achieve a synergy niche.
Auo Tft,Auo Tft Display,9 Inch Lcd Screen,10.1 Inch Lcd Display
Tonya Display Limited , https://www.tydisplay.com