The effective period of dilution of the scale inhibitor

Reverse osmosis antiscalants can be used directly or diluted, depending on the system requirements. When using it directly, the antiscalant is typically injected into the feedwater line of the reverse osmosis unit via a dosing pump. If dilution is needed, only pure water should be used to avoid contamination and ensure effectiveness. Before adding or replacing the antiscalant, it’s essential to keep the dosing tank clean and sealed to prevent impurities from entering. The recommended dilution ratio for scale inhibitors should not exceed 1:10. This means that 1 liter of concentrated antiscalant should be mixed with up to 9 liters of pure water. After mixing, the solution should be stirred thoroughly to ensure even distribution of active ingredients. It's important to note that once diluted, the shelf life of the solution is limited. According to Jinan Longchuan Environmental Technology Co., Ltd., it's best to use the diluted antiscalant within 7–10 days. Using it sooner is better to maintain its effectiveness and prevent microbial growth. Why is it important to use the diluted antiscalant as soon as possible? Because some antiscalants, such as the JC-A series, contain biocidal components that can become less effective over time. Prolonged exposure to air and moisture may lead to bacterial or algal growth, which could negatively impact the performance of your RO system. If you're using the concentrated form, you can dilute it according to the required concentration factor before application. The recommended dosage for the JC-A series is typically between 3–6 ppm, depending on the specific water conditions and system design. Always follow the manufacturer’s guidelines to ensure optimal performance and protection against scaling.

Hotel Room Hot Tub

Hotel Hot Tub,Whirlpool For 5 Person,Outdoor Hot Tub,Garden Hot Tub Spas

SpaRelax Co., Ltd. , https://www.sparelaxoutdoorspa.com