Solid wood floor installation three major doubts secret

Open the answer board

A: After the solid wood floor is used to heat the floor, it will be deformed.

When you purchased geothermal flooring, many salesmen told you that your home's solid wood flooring can be used in geothermal environment, not easily deformed, not easy to crack, but then, these pure solid wood flooring is not really able to do geothermal floor, will not be deformed or cracked How should these be discerned?

Secret: Exposing the solid wood flooring is not deformed inside

Solid wood flooring has many advantages, it looks high-end, comfortable and durable under normal conditions. However, their thermal conductivity is relatively low and they are easily deformed. So it is not suitable for geothermal environment, easy to crack or shrink.

Therefore, if you insist on buying solid wood flooring for floor heating, you will need to buy special treatment before it is deformed. There are two special treatment methods, one is high-temperature carbonization, that is, the floor blank is heated at a high temperature of 160° C. to 230° C., so that the wood is not so easily wetted in the air. The second is to use paint to completely enclose the entire wood, that is, to paint the outer surface of the wood, including the backboard and the mouth of the wood, so that the wood is not exposed to the air.

You can pay attention to the floor brochures, or ask the salesperson to see if there is any above-mentioned treatment. Of course, it is advisable to take a serious look at whether the real thing is what the salesman said and there may be other problems.

   

Two: Bamboo flooring is really not heat deformation

When buying a geothermal floor, it is ultimately sold on different types of floors. Just as a woman buys cosmetics, she is always promoted and bought a whole set. The geothermal floor that I usually hear is reinforced flooring and engineered wood flooring. For bamboo geothermal floors, I don't know whether it can be heat-resistant and not deformed.

Secret: Bamboo flooring has a greater risk of deformation than solid wood flooring

Bamboo flooring usually has two structures: one is an ordinary bamboo floor (sequentially arranged); the other is a three-layered bamboo flooring (vertical arrangement). Judging from the amount of deformation, the deformation of ordinary bamboo flooring is smaller than solid wood flooring, but it is much larger than solid wood flooring and laminate flooring. Therefore, in geothermal environment, the use of ordinary bamboo flooring is a greater risk.

If it is a three-layer structure bamboo flooring, the dimensional stability of the three-layer solid wood composite flooring is very similar, and it can be considered as a solid wood composite floor and can be used as geothermal heat. If it is carbonized bamboo flooring, the stability will be better and the risk will be relatively reduced. However, it is not recommended that the bamboo flooring be used for geothermal heating, because the risk of surface cracking and shrinkage cracking will be higher than that of reinforced and solid wood flooring.

  

Three: Does the thickness of the floor affect the thermal conductivity of the geothermal floor?

Many netizens have many doubts about the use of geothermal flooring for three-story engineered wood flooring. In addition, generally speaking, thick things are not easy to heat, and they are not easy to conduct heat. In the world of floors, is this also true?

Secret: There are impacts, but the impact is not great.

Does the thickness of the floor affect heat conduction? In fact, there are some impacts. The thinner the heat conduction, the faster it will be. However, because geothermal heating is continuous heating, it has little effect. No matter whether the thickness is 8mm or 12mm, it can be used in geothermal environment. In contrast, 8mm laminate flooring heat conduction faster than 12mm, but in a continuous heating environment, the difference between the two heat conduction is not obvious; 12mm foot feeling is better, the cost is higher.

For places of continuous heating, in Beijing and other places where the room temperature is not very cold, if the heating system can guarantee the basic requirements of room temperature, you can choose a slightly thicker floor, 12mm-15mm are no problem. If you are in a particularly cold place such as the northeast, you can consider 8mm thick floor, so that the thermal conductivity is better.

Solid wood flooring bamboo flooring parquet heating paint

Colored Glass Beads; there are different colored glass beads for decoration . such as colored glass sand, irregular colored glass beads, crushed glass sand, colored glass fire beads, crushed glass block , fire glass beads, swimming pool glass beads, landscape glass beads, countertop glass beadsd etc.

prodoct name : colored glass beads/ pebbles/ rocks

color:black,clear,yellow,brown,green,red,blue,etc.

size:1-3mm,2-4mm,6-9mm, according to client's requrements.

Shape: Chips,beads,pebble,rock.

Advantage: Environmental ,reflective, perpetual.ect

Application:Fireplace,fire beads,fire pit,swimming pool, landscape,garden floor and other decoration.

Colored Glass Beads

Irregular Swimming Pool Colored Glass Beads, Fire Pit Fireplace Colored Glass Beads, Recycled Crushed Colored Glass Beads, Garden Courtyard Landscape Colored Glass Beads

YONGQING BAILUYUAN GLASS PRODUCTS CO.,LTD , https://www.blyglassbeads.com