Smoothing of the bearing

Source: Bearing network time: 2018-07-15

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

The smoothest smoothness of the grease smooth bearing is the time of the equipment in the program; and the time to make up. Clear the old grease together or remove the old grease through the drain plug. Once the fresh grease is used, the nozzle should be scrubbed. Clean. If there is no equipment for the grease fitting in the bearing housing; then open the bearing housing cover or end cover to remove the old grease; then make up the same fresh grease.
When the oil is smooth to check the oil level of the bearing; it should be ensured that the oil type used is correct and the vent hole of the oil level device can be blocked.
Take a small amount of oil as a sample and compare it to fresh oil. If the sample looks cloudy, then it can be mixed with water; it should be replaced. If the sample is darkened or thick, it can indicate the beginning of the oil. Carbonization. All old oil should be replaced; if it is possible; use fresh oil to wash the bearings. The replacement of the oil should ensure that the oil type replaced is the same; and make up for the required oil level.
There is a more reliable way to resolve the oil condition; it is to analyze the sample; if the oil is contaminated, it should replace the oil seal or think about the filter.
Use oil bath type smooth system; if the operating temperature does not exceed 50-60 degrees Celsius; and the oil is not contaminated; then replace the oil once a year. If the operating temperature is 100 degrees Celsius; then replace the oil 4 times a year; if it is operation The temperature is 120 degrees Celsius; replace the oil every month; if the operating temperature is 130 degrees Celsius, replace the oil every week.
Proper device protection is an important factor in promoting the longest service life of bearings. It is necessary to pay attention to the cleanliness of bearings; the correctness of bearing selection and the selection of appropriate equipment and protection. Bearings need to avoid pollutants and moisture. Pollution; it is necessary to have the correct device and smoothness. The description of the bearing arrangement; the condition of the oil seal; the type of smoothing agent and the smooth cycle; so that special protection plays an important role.

Recommend to friends comments close window

Bearing related knowledge

The radial bearing related term foil bearing outlines the external reinforcement method of bearing steel.
Polyurethane coated nonmarking bearing
INA bearing smooth method

This article links to http://
Please indicate China Bearing Network http://

Previous:The door of the bearing for dismantling the vibrating screen Next:The analysis of stainless steel hybrid ceramic bearing

4A Zeolite

4A Zeolite,Zeolite 4A,4A Zeolite Powder,4A Zeolite Powder Detergent

Ningbo Jiahe New Materials Technology Co.,ltd , https://www.cnjhchem.com