![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The BWCB asphalt pump is one of the high-quality asphalt pumps manufactured by Dongxing Pump Industry. Known for its durability and efficiency, it has gained widespread recognition among customers. In this article, we will provide you with practical tips on selecting, installing, and operating the BWCB asphalt pump. Make sure to read through carefully.
When choosing the BWCB asphalt pump, it's essential to consider the specific application. For example, if it's used for pressure tank oil supply, a submersible electric pump with low flow but high lift should be selected. For an oil tower, the pump size and head must be taken into account—medium-flow submersible pumps are usually suitable. For farmland irrigation, if the lift is appropriate, a submersible pump with a larger flow rate would be more efficient. Additionally, the well diameter, oil discharge volume, and sediment content should all be considered when determining the pump specifications.
Installation should strictly follow the manufacturer’s instruction manual. Proper installation is crucial to avoid issues like low lift or motor overload due to excessive current. The pump should be installed at a depth where the distance from the bottom of the pump to the well bottom is at least 3 meters. Also, ensure that the motor cavity is completely filled with oil during installation. After installation, do not start the pump immediately. First, check the power supply, starting equipment, and instruments. Once everything is confirmed to be working correctly, perform a test run. Monitor the voltage and current using a meter, and only proceed with full operation once everything is stable.
When operating the pump, avoid frequent on-and-off cycles. Do not restart the pump immediately after stopping; wait until the oil in the pipeline has fully returned. If the submersible electric pump fails, first inspect the surrounding equipment—check if the power supply is normal, if the well oil level has dropped too low, or if there is any oil leakage in the pump tube. Only after confirming the issue can the pump be removed from the well.
It is recommended to perform a full overhaul of the submersible electric pump every two years, replacing any worn-out parts. Any maintenance should be carried out by professional repair centers to ensure quality and safety. Avoid using counterfeit parts, as they may compromise performance and safety.
If the pump is not in use for over a year, it should be removed from the well and stored in a dry, non-corrosive environment. Before storage, make sure to drain the motor's lubricating oil, remove rust, and eliminate moisture to prevent damage.
For more information, visit: http://news.chinawj.com.cn
Ventilation Duct Fan Blades,Air Compressor Parts,Air Cooler Compressor,Axial Cooling Fan Blades
Changzhou Keyleader Fan Technology Co. Ltd. , https://www.keyleaderfan.com