![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
With the development of modern architecture, wall decoration materials have become an indispensable part of building decoration materials. Wall decoration materials are getting more and more attention. How to decorate the wall? Nowadays, there are four kinds of decorative methods that are more popular: painting, wallpapering, paving, and tiling. I believe that if you don't say that everyone has seen it, what are the characteristics of the following methods?
Method 1: Brush Latex Paint
This is the simplest and most common way to decorate walls. Usually the surface of the wall is treated, leveled with putty, polished smooth, and then brush latex paint, latex paint is the mainstream of the current wall treatment. At the junction of the upper part and the top part, a plaster line is used to make the inside corner, and the lower part is connected to the ground with a skirting line. This process is simple and bright, the room is bright and spacious, but the lack of change. Can be decorated by hanging picture frames, photos, tapestries, etc. with spotlights. It must be reminded that many industrial coatings have more or less toxicity. Ventilation should be taken care of during construction. After construction, they must be volatilized at least for more than one week before they can stay in order to avoid harm to the health of the family.
Method 2: Paste Wallpaper
After the wall surface is smoothed, apply wallpaper. There are many kinds of wallpapers. There are hundreds or even thousands of wallpapers. The colors and patterns are very rich. The wallpaper is dirty and easy to clean. New wallpapers can be wiped directly with a damp cloth. The old wallpaper can be used to peel off the surface. No need to deal with it. Simply attach a new wallpaper and it is very convenient. The most important key technology in the construction of wallpaper is the problem of mildew prevention and handling of stretchability:
1) Anti-mildew treatment. Before the wallpaper is posted, it is necessary to treat the base surface first, and the flying powder and the cooked rubber powder may be used to perform batch heating and leveling. After it is dry, apply a varnish one or two times and post it again.
2) Scalability treatment. The scalability of wallpaper is a chronic problem. To solve it is to start with prevention. On the one hand, we must reserve 0.5mm overlapping layers. There are some people who unilaterally pursue aesthetics and cancel this overlap. This is not appropriate. In addition, try to buy some good scalability wallpaper.
Method 3: Laying Sheets
The entire surface of the wall is covered with a base board, and the exterior is affixed with decorative panels. The overall effect is elegant and luxurious, but it will make the room appear crowded. There is also a kind of board that is made of wood, such as density board, but it is painted white latex paint on the top. It can't be seen from the outside. It is made of plates. It is a feature that makes it easy to use the density board to cut, and the edges are neat and straight. Through the splicing of the panels to form straight lines, pits, etc., the wall surface treated in this way is both smooth and detailed, and avoids the sense of crowding caused by heavy use of plates.
Method 4: Tiles
Tiles can be used in addition to the laying of the ground, but they can also be used to decorate walls. The kitchens and balconies are more common. Tile decoration is used in these places because it is dirt-resistant and easy to clean.
Editor reminded: In addition to the floor in the living room space, the top of the room and the surrounding wall decoration are very critical, the general floor and the top of the decoration may be relatively simple form, there is nothing, but the wall decoration is very large Pay attention. One is that there are many ways to deal with walls, and each has a different effect. The second is that the same treatment often gives you a different style of decoration. Therefore, if you want to create a personalized wall, whether it is The preparation of the pre-materials or the decoration of the later period requires the residents to take a dilemma.
Home design wallpaper paving plate wallpaper paint home latex paint home decoration home wallpaper hanging picture tile adhesive balcony tile decoration home
Dicyandiamide Raw Material,High Purity Dicyandiamide,Dicyandiamide 99.5% Raw Materials,Dicyandiamide Industry Chemical Materials
Beilite Chemical Co., Ltd. , http://www.dicyandiamideblt.com