![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
There are a lot of tricky things in the decoration process, and many people will reflect a problem, as the owner must master some of the professional knowledge in the decoration of their own house, otherwise it is particularly easy to pay for the confused decoration, thus affecting the quality and taste of home decoration. In order to help everyone lift their doubts, Xiao Bian will tell you about how to do a good job of paint acceptance . I believe everyone will have a deeper understanding of paint.
Paint Paint Construction Notes
1. The construction of paint must be performed within the room temperature required by the product.
2, each process to ensure that the dry side through the second pass.
3, use the same kind of paint, do not mix different types of paint to avoid adverse reactions.
4. During construction, safety measures should be taken, such as masks.
5, try not to paint in wet weather.
6. Keep indoor ventilation to prevent poisoning.
7. When using a certain corrosive paint such as Tinner, use a good glove.
8. Do not smoke or use an open fire at the construction site to prevent fire or explosion.
9, to avoid forced construction in high humidity or cold conditions.
10, ceiling or wooden partitions need to be covered with a gap, can be used to deal with the atomized ash, then paste high-quality anti-crack tape; wall cracks can be scraped open cracks filled with plaster for processing, and then paste quality crack tape. Then paint the finish.
How to do paint acceptance
Whether the effect of the wall paint is fine and flat, does not fall off, and mold will not depend on the quality of the paint and the construction technology, especially the treatment technology of the wall base layer. Therefore, the inspection of the wall paint starts from the grass-roots level, and it should be accepted once again before it is painted, and it will be accepted again after painting.
1. Acceptance of the wall base : The primary treatment is the key to guarantee the construction quality, and it is the most basic condition to ensure that the wall is completely dry, because the mortar made of cement as a paste has strong alkalinity before hardening. When painting latex paint is bound to anti-alkaline. When the cement mortar hardens, the basic value drops sharply, and the latex paint can be applied at this time. The drying time varies depending on weather conditions and should generally be kept for more than 10 days. The wall surface must be flat and at least scraped twice. If it still fails to meet the standards, it should be scraped to meet the standard requirements.
2. Acceptance of wall paint : The materials and color of latex paint should be the same, and there must be no quality defects such as ground penetrating, leaking brush, powder falling, pitting, peeling, and biting. When spraying with a spray gun, the spray points are even and dense. No skinning phenomenon is allowed. No flow is allowed. The hand touches the paint film and does not fall out. Keep the doors, windows, lamps, and furniture clean and free of paint marks.
Xiao Bian concludes: The relevant knowledge about paint acceptance Xiao Bian introduced here, I hope the above introduction can bring you some help, more information, please pay attention to this site.
Door and window acceptance ground acceptance woodwork acceptance paint construction acceptance paint paint
20W Glue Guns Features:
1. Versatile
2. Easy
3. Quick
4. Proective Nozzle Cover
5. Trigger Flow Control
6. Bonds instantly
7. High quality
8. High temperature or low temperature
9. New design
10. With switch function
Idea for many applications. Fastening various materials such as paper, cardboard, fabric,wood, lace,trims,leather,metal,glass, tiles, rubber, ceramics and flooring etc.Ideal for hobby and household repair,DIY&craft projects.
Designed and manufactured to the highest of standards to ensure a robust and long life, we hope it provides you with many years of trouble-free, safe and reliable service.
Important Caution:
1． Before use the glue gun, check if the plug cord into electrical outlet properly;
2． When glue gun in first use, the heating element will have small smoke, it is normal situation, but the smoke will disappeared after 10 minutes;
3． After power, not for a long time in standby mode(not longer for 20 minutes), when the suspension of use, unplug first.
4． Avoid to use the glue gun under very hot or very cold environments.
5． Better not work under direct cold wind blowing, it will reduce efficiency and loss power
6． When in continuous using, do not press the trigger with great pressure, and try to squeeze out the un-melted glue, it would damage the glue gun
7． Not applicable for bonding heavy objects or objects needed strong adhesive
8． The quality of glue stick will directly influence the glue gun function and sticking objects quality;
9． If the power cord is damaged, do not replace it by yourself, must ask for professionals to replace it.
10． This tools must b e placed in its position when not in use. And storage before the tools complete cooled.
11． Be careful when using any other electrical appliance with flammable material.
12． Not applicable for a long time in the same place.
13． Do not use an explosive gas atmospheres.
14． Note that heat may be the line of sigh, combustible materials.
15． Do not leave equipment unattended when switched on.
16． This appliance is not intended for use by persons(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
17. Children should be supervised to ensure that they do not play with the appliance.
Using methods
1. Glue gun using voltage is 110-220V AC,50/60Hz;
2. Tip gun forward on stand and place a piece of cardboard under the nozzle
3. Use 7-8mm (mini trigger glue gun), 11-12(big trigger glue gun), insert glue sticks through
tunnel at back of gun
4. After power, wait for 5-10 minutes to allow glue to soften
After glue softens, squeeze trigger to feed glue through glue barrel. Excessive force will damage glue gun. Put down nozzle after work, disconnect the power plug20W Glue Guns, 20W Mini Glue Gun, Regular Glue Gun
Ningbo Kingvos Electrical Appliance Co.,Ltd , http://www.kingvos.com