Comparison of IP Network Intercom System and Analog Intercom System

The development of intercom technology in the direction of digitalization not only needs to break through the bottleneck of technology, but also breaks through the bottleneck of its development. In the process of product promotion, it is necessary for the engineering company to approve this product and understand what value-added effect this system can bring to the user. So, where is the difference between IP network intercom system and analog intercom system?
First, the lack of analog intercom system
At present, analog intercom systems use analog technology to transmit audio and video signals, and generally use bus technology to transmit signals over a common line. This technical system has the following major problems:
1, anti-interference ability is poor, due to interference, often there is no signal or image, sound is not clear and so on;
2. The transmission distance is limited, the analog signal is easily attenuated and distorted, and the amplifier must be added when the distance is long. It does not mean that the networking cost will increase and the signal's reducibility cannot be ensured.
3, using bus technology is particularly busy, because the same bus only allows two calls;
4, single function, in addition to supporting simple information publishing functions, mainly limited to call, unlock and other functions, equipment utilization rate is low;
5, due to technical reasons, product upgrades or expansion have greater limitations;
6, the lack of industry standards, and other weak electronic system integration is difficult;
7, a large amount of wiring works, high service costs, can not be integrated into the integrated network.
Second, the advantages of IP network intercom system
The IP network intercom system fully adopts TCP/IP technology and combines the latest digital audio and video compression technology, DSP technology, streaming media and network transmission technology. Its main advantages are as follows:
1, the wiring is simple. Compared with the analog video intercom system for bus transmission, the IP network intercom system is much more convenient in terms of wiring and installation and debugging. A single network cable can solve all problems, greatly simplifying the wiring project, making installation and commissioning easier and shortening the construction period.
2, networking powerful. When all signals are digitized, it is easy to meet networking requirements.
3, scalability, powerful. IP networking is highly scalable.
4, long transmission distance. The IP network intercom system based on the TCP/IP method has no distance limitation and can realize low-cost long-distance transmission.
5. The overall cost is low. For a long time, people have a fixed concept in their hearts: “New technology means high prices, and new products must be more expensive than traditional products.” So, as the leading IP network intercom system, Must be more expensive and more expensive than a traditional analog intercom system? In fact, from the point of view of installation, commissioning, and wiring, the use of TCP/IP transmission methods requires a small investment. At the same time, the construction period is shortened, personnel expenses are saved, wire and labor costs are reduced, value-added services can be brought, and maintenance is easy.

Coal Activated Carbon For Gas Purification


Gas purification using coal-activated carbon for chemical raw gas, chemical synthesis gas, pharmaceutical industrial gases, beverages with carbon dioxide gas and hydrogen, nitrogen, ozone, ethyl hydrocarbon, ethane, butane, cracking gas, inert gases, such as purification and atomic installation of exhaust gas purification. Also used to remove contaminants in the air, as well as separation and purification of mixed gases. can also be used for gas masks and protective equipment disinfection and filtration.

Use: Used in the purification, seperation and refining of chemical raw material gas, chemical synthesis gas, pharmaceutical use gas, carbon dioxide for drinks, hydrogen, nitrogen, inert gases etc.

Spec.:

Model NO.
Moisture(%)
Strength(%)
Ash(%)
Carbon tetrachloride(%)
Packing density(g/L)
Grain diameter(mm)
ZK-2050
≤3
≥95
≤8
≥50
580±20
Φ2.0
ZK-2060
≤3
≥95
≤10
≥60
530±20
Φ2.0
ZK-2070
≤3
≥95
≤10
≥70
510±20
Φ2.0
ZK-3050
≤3
≥95
≤10
≥50
540±20
Φ3.0
ZK-3060
≤3
≥95
≤10
≥60
510±20
Φ3.0
ZK-3070
≤3
≥95
≤12
≥70
500±20
Φ3.0
ZK-3080
≤3
≥95
≤12
≥80
460±20
Φ3.0
ZK-4050
≤3
≥95
≤10
≥50
530±20
Φ4.0
ZK-4060
≤3
≥95
≤10
≥60
510±20
Φ4.0
ZK-4070
≤3
≥95
≤10
≥70
490±20
Φ4.0
ZK-5060
≤3
≥95
≤10
≥60
500±20
Φ5.0

Coal Activated Carbon For Gas Purification

Coal Activated Carbon For Gas Purification,Coal Activated Carbon,Gas Purification Coal Activated Carbon,Coal Based Powder Activated Carbon

SHIZUISHAN ZhongShi activated carbon co,.ltd , https://www.zscarbonchina.com

Posted on