Cleaning and maintenance of plastic floor

1. When transporting furniture and equipment, cushion cushions should be placed on the transportation route, and should not be directly pulled on the floor.

2, in order to prevent scratching the ground, do not wear shoes with nails to walk on the ground, if possible, replace the soft-soled shoes.

3. Put a cushion between the foot of the furniture and equipment and the floor. The cushion size is slightly larger than the base size.

4. When the plastic floor is cleaned, it should be mild neutral detergent and warm water. Do not use strong acid or alkali to clean the floor. Care must be taken when treating floors with organic solvents.

5, usually pay attention to avoid hard or sharp appliances, dropped on the floor to avoid damage to the floor.

6, the chewing gum dirt adhered to the floor, can be wrapped in plastic bags, frozen into ice cubes in the refrigerator, and then placed on the chewing gum, so that it cools and hardens, and then carefully scraped off.

7. In order to reduce the wear of the plastic floor surface, extend the service life of the floor, and keep the floor clean and beautiful, it needs to be thoroughly cleaned, waxed and maintained regularly. Usually once in January-February.

8, plastic floor, can not directly contact the heat source, can not place high temperature items above 60 °C on the floor, such as electric kettle. The cigarettes that are randomly discarded, if not completely extinguished, will leave marks of burns on the floor.

9, plastic floor sprinkled with ink, oil, etc., to be treated in a timely manner, daily cleaning can be used washing powder water, soapy water to remove smudges. If you encounter smudges that are difficult to remove, do not use scouring to polish them. You need to find a professional to deal with them in time to remove the pollution.

Silicon Briquette

Silicon Briquette,Silicon Slag Briquette,Silicon Carbide Briquette,Silicon Alloy Briquettes

YINCHUAN BINHE ABRASIVES CO.,LTD. , http://www.nxbhzhang.com