What are the Fengcai feng shui in 2014? Is it a living room or a bedroom layout? In fact, many places can achieve the goal of prosperous wealth through Feng Shui layout. Then you think that the kitchen feng shui can also achieve the purpose of prosperous wealth? Understand the comprehensive kitchen home Wangcai Feng Shui? Let's take a look at the Foshan Home Network Xiaobian.

1, the kitchen does not close to the bedroom

The kitchen can't be close to the bedroom, and the fumes running into the room can cause discomfort to the human body. The stove is also unlucky for the room door.

2, the kitchen door can not be right stove

The kitchen door should not be right with the stove, and the kitchen stove exposure would be unlucky.

3, the kitchen is not right

The stove is a place for cooking for a family. It should not be too exposed, especially if it is facing the door, which will cause the outside air to go straight.

4, the kitchen does not rely on the toilet

The kitchen needs to be kept clean and tidy, and it is not suitable to be built close to the toilet, which will damage the health of the family.

5, the kitchen is numerating

The kitchen is recommended to be the four murderers of this life, which is conducive to suppressing the arrogance of the fierce position. The yang produced by the stove can modulate the suffocating air produced by the murderer and improve the feng shui. The location of the kitchen will also be in the rear half of the house, and the best is to stay away from the gate.

6, the sink and stove should not be too close

The water produced by the sink will be ignited by the fire generated by the stove. This will lead to insoluble water, Xiaobian experts suggest that the best way is not to bring the two close, the stove can not be in the center of the kitchen, too much fire will lead to poor family relations.

7, the stove should not be empty

The back of the stove can not be empty, it is best to have a wall to rely on, can not be transparent glass, otherwise it will lead to unlucky, the stove should avoid light.

8, the balcony walkway is not on the stove

Balcony walkways can't face the stove, the corridor is under pressure, which can lead to the inability to gather wealth, and family members are prone to high blood pressure and other diseases.

Foshan home network editor, the article comes from the Internet.

what is the Pipe Fan?

Pipe fan selection control parameters for the air volume, total pressure, efficiency, noise, motor power and so on. Depending on the physical and chemical properties of the gas being transported, fans of different uses are selected.

Features

1. Pipe fan selection control parameters for the air volume, total pressure, efficiency, noise, motor power and so on.

2. According to the physical and chemical properties of the gas being transported, select the fan for different purposes. Such as the delivery of clean air, should choose a general fan; transport flammable and explosive gases, explosion-proof fan should be selected; corrosive gas transmission, corrosion-resistant fan should be used.

3. Ventilator selection, should consider the leakage of piping system losses, calculation errors, and the actual fan fan, the negative pressure deviation, the general use of air flow 1.05 ~ 1.1, wind pressure of 1.10 to 1.15 safety factor. However, it is neither too large nor too large to prevent the fan from operating in an area of low efficiency for a long time.

4. Pay attention to the matching characteristics of the pipe network resistance characteristics and fan characteristics. In order for the ventilator to operate stably, the ventilator should be operated near its maximum efficiency point. The operating point of the ventilator is located on the right side of the full pressure peak point in the performance curve (ie, on the gales side and generally at 80% of the full pressure peak) ).

5. For ventilation systems with muffler requirements, fans with high efficiency and low impeller circumferential speed should be selected first and operate near the highest efficiency point. Should also be based on the ventilation system noise and vibration propagation, take the appropriate noise reduction and damping measures.

6. Pipe fan is through the blade shape changes, the air flow into the fan, the existing part of the axial flow, but also produce part of the centrifugal effect, so its performance is between the axial flow fan and Centrifugal Fan.

7. Piping ventilator can provide medium pressure and moderate air flow, ventilation system used in high-rise civil buildings are more appropriate.

Installation points

1. Fan mounting pedestal (base, hanger) should have sufficient strength, stability and durability, pedestal vibration should meet the following requirements:

1) The natural frequency of the basic device shall not be greater than 1/3 of the motor and fan speed;

2) The difference between the vibration speed when the ventilator is running and the vibration speed when the ventilator is stationary should be more than 3 times.

2. Ventilator inlet and outlet connections between the duct should be set flexible joints. Into the air duct, air duct and other devices should be a separate support, and by the foundation or other components of the firm support firm, the chassis should not bear the weight of other parts.

3. Fan installed in the building components, should take measures to isolate vibration.

4. Fan installation can refer to the following national building standard design atlas.

5. Pipe fan can be installed in the straight pipe, with easy to take over, taking up the advantages of smaller space.

Pipe Fan

Pipe Fan,Small Pipe Fan,Plastic Pipe Fan,Pipe Exhaust Fan

Shenzhen Fusheng Motor Co.,Ltd , http://www.fushengfan.com