What metal mosaic size metal mosaic construction process

With the emergence of a lot of personality materials, metal mosaic is one of them. Because of its different crafts and material selection, we can be divided into: ceramic mosaic, stone mosaic, metal mosaic, glass mosaic and so on. Next, Xiao Bian introduced to you the size of the metal mosaic and metal mosaic construction process.

What are the sizes of metal mosaics?

The metal mosaics we use are divided into stainless steel mosaics, Lvshuban mosaics, and aluminum alloy mosaics. Among them, stainless steel mosaics occupy a very small part of the metal mosaic in the market because stainless steel mosaics are chemically dimmed with oxygen. , But because of its low cost, wear and other advantages or there is a certain market. There are a large variety of mosaics on the market, rich in color, which greatly enriches the home building decoration materials market and brings more colors to people's lives.

Aluminium-plastic panel mosaic is one of the mainstream metal mosaics that became mainstream in 2010, because of its variety of patterns, rich colors, lighter textures, and relatively simple engineering when collages are widely used. Aluminum alloy mosaic particles are all aluminum, its strength compared to the first two have a guarantee, and can be secondary processing, can be used as phantom, laser and other decorative, but because of its high cost, and the color is relatively simple Therefore, there is no aluminum-plastic plate mosaic that is loved by consumers.

Commonly used mosaic sizes are the following 9.5x9.5mm, 10x10mm, 15x15mm, 20x20mm, etc., and the thickness is mainly 1mm, 2mm24mm, 5mm, 6mm, 6mm, 8mm, 10mm, 12mm, etc. The thickness of the metal mosaic is generally between 4-8mm.

Metal mosaic construction process

The most intuitive understanding of metal mosaic is to replace the past tile mosaic material with a metal material, texture is more intense, and with a strong self-style, once the launch is concerned. If your home wants to decorate with this kind of material, then you should pay attention to this article and Xiaobian will immediately explain the construction process of metal mosaic.

First, the mosaic of any material must ensure that the construction surface is clean and tidy before construction. The metal mosaic is no exception, and the requirements are more stringent. In particular, attention should be paid to checking whether the wall is wet or cracked. Because the metal mosaic's air permeability is not as strong as tile mosaics, or even as it has no special gas performance, the water vapor will remain in the wall for a long time. The long time the wall will have a moldy metal mosaic and the backside glue will fall off due to the moisture.

Second, after the inspection work is done, it is necessary to prepare for paving. First, the mosaic will be positioned on the wall to be paved, and then the horizontal line of the pencil box will be used to determine the line. In the second step, the adhesive of the metal mosaic can be uncovered, and then it is pasted according to the position of the scribe line. At this time, care should be taken not to use force, and to avoid minor adjustments in the areas where irregularities occur later. After the third step of the metal mosaic is laid, you can use the ruler to gently flatten the surface, taking care not to forcefully break the metal surface. The fourth step is to use a small rubber hammer to gently beat the metal mosaic surface to make the adhesive and wall adhesive more secure, especially at the edge. In the fifth step, the metal mosaic is processed without joints, so after the plastering is completed, the protective film on the mosaic surface can be peeled off and then wiped with a soft cloth. Here is a special reminder, because it is a metal material in order to avoid chemical reactions, be careful not to use acidic and alkaline cleaning agent to wash, to avoid the mosaic surface black rust.

Thirdly, after metal mosaics are laid out, it is best to seal them in space for 48 hours. This time is the period during which sticky gums are sticky. Therefore, do not apply water to the mosaics to avoid falling off due to poor viscous effect.

Editor's summary: What are the dimensions of the metal mosaic and the metal mosaic construction process introduced here, I hope to help everyone. If you want to know more related information, you can pay attention to this website information.

Metal self-locking nut metal high pressure hose metal wind chime metal chair metal storage box

We export one type Pile Driver, which is small and portable. It can install Ground Screw Piles of diameter 68-76mm length 1200mm. The main body weight is 28.67kg, the Max.Torque is 2600 N.m, the No-load speed is 12/6 r/min, the frenquency is 50-60HZ, the voltage is 230V, the Max, current is 7A and the Max.power consumption is 1600W. The Small Pile Driver is widely used in fence systems, small wooden house project, solar panel structures and so on. If you want to order this type pile driver, we will delivery it at any times because we have enough stock. So, welcome to contact us and buy the pile driver to install Ground Screw Pile for finishing your projects.

Small Pile Driver

Electric Pile Driver, Small Pile Driver, Pile Drivers

Hebei Honde Industrial Trade Imp&Exp Co., Ltd. , https://www.groundscrewpile.com