LED high pole light solution

LED high pole lights are widely used in roadways, highways, and other large outdoor areas. They not only provide efficient illumination but also offer an attractive and modern appearance, making them highly decorative. Mingtai Technology's LED lighting driver power supplies are designed for high-power applications and can be directly connected in parallel to meet ultra-high power demands. For example, a 300W power supply can be achieved by connecting three 100W units in parallel. When using high-power LED light sources, it is recommended to use a split-drive approach. For instance, a 200W LED source should be driven by two separate 100W power supplies, which helps balance the current, improve system reliability, and reduce light degradation over time. For high-pole lighting applications, there are several alternative solutions to replace traditional high-pressure sodium or metal halide lamps. One common option is replacing a 1000W high rod sodium lamp with an LED equivalent of 300W–400W. Here are some suggested configurations: **Solution 1:** Use a 120W LED light source with Jingke 4X10W (36 strings) X3 integrated LED combination. The 120W power supply can use the TESEMI 120W electrolytic capacitor power supply. **Solution 2:** Use a 300W high-pole light configuration from Hong Kong-based manufacturers. This involves combining three 100W LED light sources. Each 100W light source uses a 42-string X2 integrated LED combination, and the power supply uses a TESEMI 100W electroless capacitor unit. **Solution 3:** Use two 180W LED lamps combined with a 42-string directional LED configuration. The power supply for each 180W unit can be a TESEMI 180W electroless capacitor power supply. **Solution 4:** A 300W LED light source can be paired with a 42-string X6 LED configuration. The power supply can either be a single TESEMI 300W electrolytic capacitor unit or two TESEMI 150W electroless capacitor units connected in parallel. When designing LED high-pole lighting systems, the structural design plays a critical role. Since multiple light sources are often used, the luminaire must be engineered to handle wind resistance, ensure waterproofing and moisture resistance, and provide efficient heat dissipation. Additionally, during installation, it's best to consider balanced AC three-phase power supply to optimize performance and stability. 

Industrial Fasteners

Yokelink supply a vast range of Industrial Fasteners to DIN, ISO & ANSI standards, including: Nuts, Bolts, Screws, Washers .There are hundreds of combinations of materials, heads, threads, plating, heat treating, and secondary operations. The materials and finishes including Steel, Brass, Stainless Steel, Aluminum, Zinc plating, Galvanized and Black. Providing standard and specialised Fastener solutions, coupled with industry customers. We also have the flexibility, capacity and expertise to manufacture fully customised fasteners specific to your application.

nut, washers, stud, DIN 25201, shaft collar, quick release pin, Detent Pins, Lanyard, Stainless Steel solar fastener,IEEE Standard,Nuts,Alloy Steel, Taper Lock Studs, Tactor Parts,Caterpillar Replacement,tap washer

Ningbo Yokelink Machinery Co.,Limited , https://www.yokelink.com