![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Car seat cushions have become the must-haves for car owners to decorate their cars. Nowadays, many people choose to buy seat covers online, which are cheap and affordable, but it seems to be a little difficult for some car owners who want to install their car cushions by themselves. The following small series finishing the detailed steps how to install a car seat covers, hoping to be helpful to everyone.
How to install car seat cover
One, front back:
1, first remove the headrest (usually press the head on the activity bolt);
2, the back cover (see the right and left sides and positive and negative sides) well; left and right to see whether the back pocket bag is in the middle, if it is on the side of the door, then it shows that the reverse.
3, the back of the back cover from the joint with the seat plug to the back of the back, with the back of the back of the cover set at the bottom of the adhesive tape with a little force, close and more will be more docile and look good.
4. Then insert the headgear and insert it into the backrest.
5, the back of the set of flat finishing, the back seat to complete the installation.
Second, the front seat:
1, first set the seat cover in the seat, and adjust the position (seat position before the two corners open);
2, near the back of the spare part and Velcro and rope directly along the gap behind the back of the backrest, and pull the rope on both sides as far as possible to the bottom of both sides; the rope on the side of the seat tightly tied, and then put the Velcro under the seat In the front (be careful not to twist with the button) there are two work buckles on both sides of the front and the lower side of the seat. The Velcro is open to pull through the open buckle and tighten it against the white bottom (the plush side).
3, then set the finished seat cover flat, the front seat installation is completed (the same about the same installation).
Third, backrest installation
1, first remove the headrest;
2, the back cover set;
3, the back of the back cover of the Velcro and the rope plug into the back of the copy, the Velcro string from the bottom of the string back to the back through the top of the plastic buckle back to stick, rope and the back of the side of the rope tightly tied to each other;
4, the set of good backrest flat, then insert the headrest, backrest installation is complete.
Fourth, the rear seat installation
1, the seat after the seat slightly pulled up, the entire seat can be turned up directly, then the installation is quite simple;
2. Put the seat cover on the seat and adjust the proper position;
3. Pull the Velcro on the front end of the seat at the back of the seat from the underside of the seat to the back of the plastic buckle and fold it back to stick it; tighten the rope at the back end tightly; then fix the seat cover and flatten it, and install the front seat back. .
The above points are the information on how to install the car seat cover for everyone on this site Xiao Bian, I believe we will have a certain understanding after reading, so that everyone will know a lot, if you still have those who want to understand You can check it out on our website.
Construction installation with loft how decoration decoration installation car led lamp decoration loan how to apply
UPVC pipe and fitting is produced by material of unplasticized polyvinyl chlorde, according to standards of ANSI SCH80,SCH40,DIN PN10,PN16, JIS10K, different pressure rate and class for different application. it has good property of corrossion resist, light weight, easy installation and maintaince, cost low, etc. pressure rate PN16 PVC pipe and fitting is it suitable for water supply, water treatment, chemical industrial, etc.
Ningbo RMI Plastic Co.,Ltd offer UPVC Pipe Fitting with specification:
Size:20mm to 400mm
Connection: socket
Standard: DIN PN16
Pressure rate: PN16
Items: Coupling, elbow, tee, reducer, flange, bushing, union, reducing tee, female coupling, made adaptor, end cap.
UPVC Pipe Fitting PN16,UPVC Pipe Fitting,UPVC Elbow,UPVC Coupling
Ningbo RMI Plastic Co., Ltd. , https://www.rmiplast.com