Advantages of Weijing CNC boilers compared to conventional boilers

Advantages of Weijing CNC boilers compared to conventional boilers




First, efficient energy saving

1. Saving coal - 40-50% less than traditional coal-fired boilers.

2, burning bituminous coal does not smoke - using the latest combustion technology, soot, carbon black are burned as fuel, the boiler runs 5 to 10 minutes. No smoke can be seen at the exit of the chimney, and high sulfur coal can achieve the same effect.



3, fast heating, high thermal efficiency - the boiler heat exchange system uses the super-thermal pipe, fire tube, multi-return technology, designed and manufactured by the factory, the temperature is nearly double that of the traditional boiler, the exhaust gas temperature can be reduced to Below 120 ° C, the boiler thermal efficiency is as high as 85% or more.

4, constant temperature automatic control, when the temperature reaches the set value, automatically slow down the burning speed, that is, to ensure a stable temperature, and greatly save coal.

Second, green environmental protection



The boiler itself eliminates smoke, self-dusting, and self-desulfurization--without adding any other dust-removing device, the boiler itself realizes smoke elimination, dust removal and desulfurization. The back-burning and vortex-wind combustion technology is adopted, and the temperature of the second combustion chamber of the boiler is as high as possible. Above 1500 °C, the tar and carbon black in the coal are burned out at high temperature, and the sulfur in the coal is combined with other substances under high temperature to form a salt substance. Finally, no other dust removal and desulfurization device is added, and the boiler itself is used. It has met environmental requirements.

Third, safe and convenient



1. Adopt microcomputer numerical control system. The boiler is automatically controlled and does not need to be monitored for a long time in normal operation.

2. Large coal storage bins and one coal addition can burn continuously for several hours. Add coal every two or three times a day.

3. The boiler has a long service life and the boiler adopts a new design concept. The coal is first burned in the combustion chamber, and the resulting smokeless high-temperature gas enters the fire tube and heat is exchanged through the fire tube, which not only improves the thermal efficiency of the coal, but also causes the fire to burn. Less than the metal drum, greatly improving the life of the boiler.


Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn

DIN Metric Hydraulic Adapter seraspecifications are controlled by Germany, but other countries use them as a reference for their connector and port designs. All metric fittings are measured in millimeters. Unless otherwise specified, the size refers to the outside diameter.                                                                      
 Inculde: Metric Thread O-ring Face Seal Adapter Fitting
Metric Thread Bite Type Hydraulic Adapter
Metric Thread 74° Cone  Hydraulic Adapter Fitting
JIS Metric Thread 60° Cone hydraulic fitting adapter

Metric Hydraulic Adapter

Metric Hydraulic Adapters,Metric Fittings And Adapters,Hydraulic Adapter Fittings,Adapter Fittings

SHIJIAZHUANG TOPA TRADING CO., LTD. , https://www.topahydraulic.com