![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
First, the material requirements
1. Wood and products: Red, white pine and hardwood dry materials are generally used, the moisture content is not more than 12%, and cracks and distortions are not allowed. Normally, semi-finished or finished products are produced by wood processing plants and installed at the construction site.
2. Hardware accessories: According to the design selection of hardware accessories, curtain rails and so on.
3. Metal curtain rods: general design assigned drawing number, specifications and construction forms.
Second, the main equipment
1. Hand drill, small electric table saw.
2. Large woodworking plane, small plane, slot planer, small wooden saw, screwdriver, chisel, punch, hacksaw and so on.
Third, the operating conditions
In a room with a dark curtain box, the ceiling construction should be carried out simultaneously with the installation of the curtain box.
Fourth, the operating process
1. Process flow
Positioning and scribing → Inspection and processing of embedded parts → Checking processed products → Installing curtain boxes (rods)
2. Positioning and scribing: To install curtain boxes and curtain rods, the center positioning should be done according to the requirements of the design drawings, and the leveling lines should be made to look for good structural relations.
3. Inspection and handling of embedded parts: After finding the wire, check whether the position, specification and pre-embedded part of the fixed curtain box (rod) can meet the requirements of installation and fixation. For elevation, flatness, central position, and out Wall errors should take measures to deal with.
4. Verification of processed products: Check the processed products that have entered the market. Before installation, check whether the varieties, specifications, and assembly structures meet the design and installation requirements.
5. Curtain box (bar) installation:
1) Install the curtain box: first determine the elevation by flat line, and draw the middle line of the curtain box. When installing, align the center line of the curtain box with the center line of the window and the wall of the box should be strictly adhered to.
2) Install curtain rails: There are single, double or triple tracks for curtain rails. When the window width is greater than 1200mm, the curtain rails should be disconnected, the snaking bend should be staggered at the disconnection, and the sag bend should be smooth, with a lap length of not less than 200mm. Ming curtain box is generally first track. Heavy curtain rails should be machined screws; dark curtain boxes should be placed on the track. Re-curtain track small angle should be encrypted spacing, wood screw specifications not less than 30mm. The rails remain in a straight line after installation.
3) Curtain rod installation: Correct the connecting fixture, put the rod or wire on it and pull it on the fixture. Do the same with the room elevation.
V. Quality standards
Guarantee project
1) The species, material grade, moisture content, and anti-corrosion treatment of wooden curtain box products must comply with the design requirements and the current “Code for Construction and Acceptance of Wood Structure Engineeringâ€.
2) The installation of wooden curtain boxes and curtain rails must be firm and free from loosening.
3) The selection of curtain rods must meet the specifications specified in the design and the fasteners must be firm.
2. Basic items
1) The production dimensions are correct, the surface is straight and smooth, the edges and corners are straight, the lines are straight, the nail caps are not exposed, there are no flaws, planing marks, burrs, hammer marks and other defects.
2) The installation position is correct. The two ends have the same dimensions, the joints are tight, the wall size is the same, and the rails and rods are straight.
Sixth, finished product protection
1. Do not step on the radiator and sill plate during installation. Do not knock on the sill plate to prevent damage.
2. Brush a bottom paint immediately after the curtain box is installed to prevent moisture deformation or contamination during plastering and spraying.
3. Curtain rods or lead wire to prevent nicks, processed products should be properly stored to prevent deformation caused by moisture.
Seventh, should pay attention to the quality problem
1. The installation of the curtain box is uneven and unsatisfactory: it is mainly to find the position, draw the dimension line is not serious, the embedded part is not installed properly, and the adjustment is improperly handled. Before installation, do the correct marking. The installation scale must be consistent with the elevation and accurate center line.
2. The length of the two ends of the curtain box is inconsistent: the center of the window is relatively inaccurate with the center of the curtain box, and the operation is not serious. When installing, check the dimensions so that both ends have the same length.
3. Curtain track fall off: Mostly due to thin cover plate or loose screws. The thickness of the general cover plate should not be less than 15mm; the cover plate thinner than 15mm should be used to fix the curtain rails with machine screws.
4. Curtain case facing panel distortion: dry wood during processing is not good, stored damp after entering the store, the installation should be promptly painted paint again.
>>>Related Links: Choosing the curtain rod can show the owner's fashion taste
Villa Design Three Trees Painted Windows Room Paint Heating
Reflective Material Car Number Plate Co.,Ltd , http://www.nsreflectivematerial.com