Wood floor insects solution

Wood floor insects solution:

After the wood floor is wormed, no matter what method you want, you should solve these bugs as soon as possible to maintain the family's peace and comfort. If the wood floor has been found to be worm-eaten, timely treatment is the most direct and effective method.

If the wooden floor is a small area of ​​insect eclipse, it can be solved by syringe injection of kerosene, but this method will have the residual odor of kerosene and can only be used in a small area. Consumers should seek timely solutions to professional wood flooring sellers. Regular wood flooring companies will have professional personnel to remove insects.

In addition, some consumers use insecticides to remove insects themselves. If the methods or medicines are not correct, they will not only fail to eliminate the insects, but also may delay the best time to remove the insects. Therefore, it is recommended that you do not use this method as much as possible. .

Some people think that spraying a layer of charcoal, charcoal or pepper on the ground before the wooden floor pavement can effectively prevent insects. Experts believe that this is not desirable. Although charcoal and charcoal can absorb moisture in a short period of time, they do not digest the moisture, and they are often released again, and the purpose of preventing moisture is also not achieved. The practice of putting pepper is not advisable. Usually, dried pepper can deworm, but many examples show that pepper is often caused by moist insects and then on the floor.

Tip: The production of insects requires a certain degree of humidity and temperature, so if the wooden floor is wormed, most of the cause is caused by moisture, so the key to pest control is moisture. Therefore, the best way to prevent insects is to apply a layer of moisture-proof treatment to the ground when installing the wooden floor, or to apply a layer of moisture-proof paint.

We can offer Cooling Tower fills for Marley, BAC, Evapco with counter flow fill and cross flow fill. Cooling Tower Fill is one of the most important medium for exchange of air and water in cooling tower. The heat and resistance characteristic of the cooling tower fill are the main factors influencing the cooling efficiency. Our cooling tower fill is with the advances of good chemical stability resistant acid, alkali and organic solvent corrosion, high cooling efficiency, small ventilation resistance, super - hydrophilic, large contact area etc.

Cooling Tower Filling

Cooling Tower Filling,Types Of Cooling Tower,Cooling Tower Systems,Induced Draft Cooling Tower

Shandong Hiking International Commerce Group Co.,Ltd , http://www.hikingfrp.com