What is the cause of the water heater not catching fire?

[ Pacific Security Network News ]
With the current social and economic development and the improvement of people's living standards, gas water heaters have entered thousands of households, providing people with a steady stream of hot water. Gas water heaters have won the favor of many consumers because of their simple operation and low cost of use. However, in daily use, the water heater often fails to catch fire. So what are the reasons why the water heater can't catch fire? How to solve it?
To understand the reason why the water heater can't catch fire, first of all, we must understand the principle of water heater ignition. The gas water heater ignition device is actually a water gas linkage device, which has two parts: a water control device and a gas control device. The working principle of the igniter is very simple. When the device detects enough impact water pressure, it will start the gas switch connection circuit and start the motor and pulse igniter. When there is gas in the air control device, the pulse current generated by the pulse igniter ignites the gas. When the water flow continuously flows into the gas water heater, the gas water heater enters a continuous working state.
According to the working principle of the gas water heater ignition device, we can analyze the reasons why the gas water heater can not catch fire. The first is water pressure: if the water pressure is not enough, the water pressure can not be connected to the gas switch, which will cause the circuit to be unable to connect and thus fail to ignite. At this point we need to check the water pressure. The second case is gas: if there is no gas in the gas pipeline, it will not ignite at this time. The third case is the pulse switch: the pulse switch is started by the power supply, and if there is no power pulser, the current cannot be generated. At this point we need to check if the power of the gas water heater is normal.
Through the above description, we understand what are the reasons why gas water heaters can't catch fire. Although the gas water heaters on the market have undergone national mandatory inspections, we should pay attention to ventilation when using them.

JBL, JBT, JB-TL series specific Parallel Groove Clamp is suitable for unendure force splicing and branch on the aerial wire, being used with insulation cover, It`s action is insulation protection.
Structure feature:
â—†  Select oxidize-resistance aluminum alloy
â—†  All parts connected with each other, it can`t l;lose parts during installation.
â—†  An are embrance the most part,conductor can`t change.
 Insulation cover performance feature:
â—†  Withstand voltage: ≥ 18kV keep voltage one minute not breakdown
â—†  Insulation resistance: ＞ 1.0x1014Ω
â—†  Environment temperature: -30℃~90℃
â—†  Weather proof performance: have good performanced after 1008 hours 

artifical climte aging test.

Parallel Groove Clamp


If you have any questions, please contact with us directly.
Our company is solemnly committed to the majority of customers: reasonable price, short production cycle, considerate service. We look forward to cooperating with you.

Parallel Groove Clamp

Parallel Groove Clamp,Jby Parallel Groove Clamp,Copper Parallel Groove Clamp,Aluminium Parallel Groove Clamp

Shandong Vantage International Trade Co., Ltd. , https://www.steelplate.be

Posted on