![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
   There are so many kinds of solid wood furniture on the market, and there is a big gap in prices. Consumers are often confused by the "solid wood", "pure solid wood", "all solid wood" and other gimmicks. Recently, Ms. Zhang, who lives in Shenzhen, encountered such a situation: Ms. Zhang spent 20,000 yuan in a large home shopping mall to purchase a solid wood bed, but the friend who knew the goods recognized that the bed was not the pure solid wood furniture that the merchant claimed. It is a synthetic board made of synthetic wood. Ms. Zhang repeatedly asked the merchants to return the goods, but the merchants refused to compensate for the reason that the beds they sold were authentic solid wood furniture. The two sides held each word and the negotiations failed.
First, verify whether it is solid wood Since it is solid wood furniture, the first step is to verify whether it is solid wood. The easiest way to tell is to look at the grain and knots. The solid wood has a natural texture, such as a wardrobe door, the front is a pattern, and the back of the pattern will also have a corresponding pattern. If the wood grain is well connected, it is proved to be made of pure solid wood. Similarly, the scar on the pure solid wood board scar will also appear. However, when the door panel is thickened or double-layered, it cannot be distinguished by this method.
Second, the identification of tree species is also solid wood, but the price of various types of tree species also has a big gap. Generally speaking, ordinary solid wood furniture is usually made of white oak, ash, eucalyptus, rubber wood, eucalyptus and the like. Relatively valuable are rosewood, wenge, rosewood and other species. It is difficult for consumers to judge the difference between various tree species from the naked eye. The most convenient way for Titan Madi to tell you is to ask the shopping guide or look at the product label to understand the tree species and compare the prices.
Third, look at the advantages and disadvantages of wood If it is high-quality solid wood furniture, open the door, drawer, you can observe the wood is dry, white, clear wood grain, wood tight. Moreover, there is no irritating odor.
Fourth, observe whether there are defects Solid wood furniture defects mainly refer to the following aspects:
1. Whether the furniture load-bearing parts such as sofa legs and columns are close to the ground, whether there are large knots or cracks.
2. Whether the screws at the joints of the various components are secure.
3. Detail processing is the most important criterion for testing the quality of a piece of furniture. Generally good solid wood furniture is polished and meticulous in design, and the design tends to be humanized, and some locations will have solid wood logos.
V. Pay special attention to the moisture content and origin of solid wood furniture. The north-south climate difference in China has a great influence on the moisture content of wood. Generally, the moisture content of furniture purchased should not exceed 1% of the average humidity in the area. Otherwise, the wood will be "swelled by air". Cold shrinkage causes problems with furniture cracking, warping, and even falling apart.
Sixth, check the panel paint surface Touch the furniture surface with your hand to check whether the polished surface is smooth, the paint surface of high-quality solid wood furniture will be as smooth as the baby's skin. It is worth noting that it is necessary to watch the details such as the table legs to be rough, whether the pigment is too thick, cracks and bubbles.
Seven, "stand up" test
This method is the easiest and most effective way to turn the chair and the furniture with the cushion surface upside down, and you can carefully observe its material. Furniture like a table can also be inspected from the bottom to check the screws and wedges of the reinforced joints for extra glue.
Source: GO Jiaju Furniture Network
Reflective Glass(coated glass),also known as heat-reflective glass(solar-control coated glass),is plating on high-quality Float Glass surface with a vacuum magnetron sputtering ws0ay to multi-layer metal or compounds coating. It can control the direct solar radiation reflection, transmittance and absorption by the ratio to reach the needed reflective color. The development of architectural aesthetics arouses high requirements to the architectural glass on lighting with appropriate sight shielding, energy-saving with decoration, which could be realized by reflective glass.
Reflective Mirror Glass,Online Coated Reflective Glass,Blue Light Reflective Glasses,Online Reflective Glass
Jinan Coton Glass Co., Ltd , https://www.cotonglass.com