What are the advantages of low temperature floor radiant heating systems?

Low-temperature floor radiant heating is to lay pipes under the indoor floor (such as cement floor, tile floor, wooden floor), and the floor heating is cooled to a certain temperature by special bidirectional circulation of the hot body inside the pipe, and then the floor radiates heat evenly to the room. At the same time, under the effect of the difference in specific gravity of hot and cold air, the natural convection phenomenon of the air is generated, thereby creating an indoor thermal micro-climate with an ideal temperature distribution, so that the indoor environment reaches the most comfortable state of human senses. Compared with traditional heating methods, floor radiant heating has the following advantages:

The traditional heating method is convection, including the use of radiator cooling and air conditioning to adjust the temperature.

Modern heating, both floor radiant heating, uses the piping system that goes into the floor to radiate heat into the room and gradually raises the room temperature from bottom to top to achieve heating.

Energy efficient

The radiant heating method concentrates on the height of the human body's benefit, and is more efficient than the convection method (such as the parameter designed to be used at 16 degrees Celsius, which can achieve a heating effect of 20 degrees Celsius); the low temperature heat transfer, the heat loss of the whole transport process is small, and the energy saving is higher than that of the traditional air conditioner. About 20%, more than 30% energy saving than traditional radiators.

Comfortable care

Low-temperature floor radiation heating, indoor surface temperature is uniform, gradually decreasing from bottom to top at room temperature, giving people a good feeling of warm feet, thus forming a thermal micro-environment that truly meets the human body requirements.

Good thermal stability

Since the ground floor and the heat storage layer have a large amount of heat storage, the indoor temperature changes slowly under the condition of intermittent heating, and the thermal stability is good.

save space

Concealed installation, the elimination of the traditional indoor radiator and its branch pipe, easy to decorate and furniture layout, increased the use of area.

Solve the problem of household measurement

Radiant floor heating is installed in parallel with two pipes. Each household controls the amount of circulating water, which solves the problem that the heating system cannot measure the charges correctly according to the household.

Easy to adjust at room temperature

Each loop in the water separator is equipped with its own control valve, and each household adjusts the flow rate according to the required room temperature to achieve maximum energy and cost savings.

Environmental sanitation

The low surface temperature will not cause the rapid flow of air in the room and the flying of dust, reduce the evaporation of water in the air, reduce the pollution of walls, articles and air, and eliminate the odor of the hot equipment and the dust surface of the pipeline, thus improving the hygiene. condition.

The soundproof floor is covered with thermal insulation and the sound insulation effect is remarkable.

Long system life, maintenance free

The plastic coil has a long service life, and the system adopts the coil circuit technology. There is no joint in the dark pipeline system, and it is not suitable for leakage and maintenance.

[Application field]:

Since the low temperature floor radiant heating system has the above series of advantages, it can be applied to the following fields:

1. Residential, villas, hotels, office buildings, hospitals, shopping malls, kindergartens, laboratories.

2. Swimming pool, football field, gymnasium, museum, memorial hall.

3. Airports, passenger stations, parking lots, highways, botanical gardens, greenhouses.

Concerned about surprises

Label: What are the advantages of low temperature floor radiant heating systems?

Previous: What types of odor-resistant floor drains? Next: What is the principle of air conditioning heating and cooling?

SHINE Precast Accessories used with our SHINE Shuttering Magnets together, high strength, good rigidity, special edge tooth design can close engagement with the magnetic chuck , strong coupling, in under the action of external force does not produce any gap, loose, make the final concrete wallboard quality to achieve the optimal.

SHINE precast adapter for the quick fixation of window and door recesses, wood shutterings, fibre concrete upstands and other shuttering elements.

This lifting tool is for shuttering magnets of our line, it is strong available for all our shuttering magnets. With this tool,it is convenient for you to use our shuttering magnets freely and help you out from awkward hand power. We can make different type with customs requirement.

Precast Accessories

Precast Accessories,Precast Concrete Adapter,Precast Shuttering Magnets,Precast Concrete Magnets Lever

Ningbo Shine Magnetic Technology Co., Ltd. , https://www.shutteringmagnetic.com