![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Pass gates such as swing gates and wing gates are very common gates, and they are used in a wide range of situations, and the frequency of use is also high. Pass gates such as swing gates and wing gates, if carefully maintained, generally do not present significant problems. However, a small probability event does not mean that it will not occur. The maintenance personnel know more about some of the latest troubleshooting methods and will bring a lot of convenience to daily maintenance.
1. After swing gates, wing gates, and other passage gates have been swiped, the swing door will not open the door and no response will occur. After the power is turned off, it will not turn on automatically. Check again to see if there is any drop in the signal line. Check the open signal on the main board. The indicator light has received the open signal.
2. After swiping, the gate opens, but the gate is not closed. This situation is usually not good for the middle anti-clip infrared. Before fixing the chassis, it must be determined that the infrared pair is good enough to open and close the door normally. If there is no good infrared, after power on, it will alarm. After swiping, please use the direction arrow to exercise.
3. After the channel gate is swiped, there is one open and one is not open. Check again if the sync line is connected. After the connection is guaranteed, if the motherboard that does not open has received an open signal, if not, check whether the wiring is dropped or if the plug on the motherboard is plugged in.
4. The working status of the swing gate, wing gate, etc. channel gate direction indications are: the green arrow points to the left, to the right, or to the red cross. If the direction indicates no response, or the direction of the indication is incorrect. You can switch to another test and try it with a good one. Check the wiring again.
1. After swing gates, wing gates, and other passage gates have been swiped, the swing door will not open the door and no response will occur. After the power is turned off, it will not turn on automatically. Check again to see if there is any drop in the signal line. Check the open signal on the main board. The indicator light has received the open signal.
2. After swiping, the gate opens, but the gate is not closed. This situation is usually not good for the middle anti-clip infrared. Before fixing the chassis, it must be determined that the infrared pair is good enough to open and close the door normally. If there is no good infrared, after power on, it will alarm. After swiping, please use the direction arrow to exercise.
3. After the channel gate is swiped, there is one open and one is not open. Check again if the sync line is connected. After the connection is guaranteed, if the motherboard that does not open has received an open signal, if not, check whether the wiring is dropped or if the plug on the motherboard is plugged in.
4. The working status of the swing gate, wing gate, etc. channel gate direction indications are: the green arrow points to the left, to the right, or to the red cross. If the direction indicates no response, or the direction of the indication is incorrect. You can switch to another test and try it with a good one. Check the wiring again.
Insulation Fastening Systems is a efficient way to fix insulation board in building outer wall. Re-designed Actuated Tool and Gas tool will drive Insulation Fasteners into outer wall very rapidly. The efficiency is about ten times than anchor.
Insulation Fastening System,Insulation Fastening,Insulation Nails,Insulation Anchors
Yibin Heheng Technology Co.,Ltd , https://www.actuated.nl