![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
Today, wood floors have become the trend of the ground decoration materials, many families have chosen to use solid wood flooring for decoration. As the saying goes, three-point floor, seven-point installation, no matter what kind of floor, installation is very important. The quality of laying quality directly affects the appearance, comfort and service life of solid wood flooring. Therefore, we must pay attention to the laying of science, according to statistics from relevant departments, there are problems in the actual use of solid wood flooring, more than 50% is caused by improper laying, only 5% is the quality of the dry floor itself. It can be seen that whether or not the solid wood floor laying process is reasonable is one of the important factors that affect the floor use effect. Today, I will give you a general introduction to the methods of laying solid wood floors and the notes on laying solid wood floors .
Four commonly used solid wood flooring laying methods:
1. Suspension Laying Method: The most popular and scientific laying method at present.
2, keel laying method: the most traditional and most popular laying method.
3. The laying method of the keel floor keel: Add a layer of 12mm-22mm multi-layer high-quality plywood or softwood material on the keel, and then lay the floor.
4, direct paste laying method: suitable for <350mm long floor, and the ground level.
Each of the above four laying methods has its own advantages and disadvantages. Users and construction units should choose due to people, place, and function. According to the actual conditions and usage habits of our civil residential buildings, suspension laying and keel laying are recommended.
Solid wood floor laying construction note six steps
In the construction of floor decoration, there are many problems in the laying of solid wood flooring. Therefore, in the construction, you must supervise the workers to follow the “six steps†of construction of solid wood flooring:
A. Before the construction, prepare the grid (wood keel), wooden floor blocks, skirting board, waterproof paper and other materials and construction tools. Pay attention to the decorative materials must be selected after drying, anti-corrosion, pest control type and model, the smaller the color difference of the material the better. Before laying wooden floors, all indoor “wet operations†are required to be completed. The embedded parts shall be laid in place according to the design requirements. The degree of plaster drying shall be more than 80%. After the doors, windows and glass are installed, the horizontal elevation lines will be bombed.
B. When laying the grille (wood keel), it should be closely combined with the ground embedded parts.
C. Laying the grid grille should pay attention to the degree of density and whether it is tightly and firmly connected with the main grille.
D. Make a good ventilation slot, pay attention to the consistency of the sequence, orientation and direction.
E. Pavement partitions (large core panels). Note that the partitions should be tightly and firmly bonded to the wooden keel.
F, Paving wood flooring, pay attention to the order of paving, floor tiles with patterns, patterns should be done in advance sequence mark. In the vertical angle between the edge of the wooden floor and the wall, about 10 mm expansion tank should be reserved to prevent the wooden floor from warping due to heat and moisture.
Therefore, in the process of laying solid wood flooring must pay attention to the above six steps, if there are questions in doubt, it is best to consult a professional or floor business, laying this mark must be good, so as not to appear in the future use Problems will be quite troublesome when they are solved.
Laying solid wood flooring should avoid 5 major mistakes
The ground is not leveled: the unevenness of the ground will cause some of the floor and keel to float, and sound will be heard when stepping on.
The keel is not moisture-proof: the dry wood keel has a moisture content of about 25%. The qualified wood flooring moisture content is generally 12%. The humidity difference is too large to cause the wooden floor to rapidly absorb moisture, causing the floor to arch and the paint to burst.
Too loose or too tight: As the temperature and humidity of the environment change, the wood floor will expand or shrink. Therefore, when laying floors, the tightness of the wood floor should be properly arranged according to the ambient temperature and humidity of the place of use. If it is too loose, there will be a large gap in the floor contraction; if it is too tight, the floor will be arched when it is inflated. .
Fix with nails: In the construction, fixing with wooden wedges and nails will cause the nails to become insufficient due to the contact between the wooden wedges and the nails. This can easily cause the looseness of the wooden keel and it will appear when treading on the floor. sound.
The project has a cross: During the construction, the floor is first spread and then other constructions are performed on the floor. This is the usual practice of the current decoration team, but in this way, after the floor is laid, it often takes one month or even longer to polish the paint. During the period, the floor and surrounding water vapor and chemicals are not isolated. It is likely that the wooden floor will be deformed and cracked due to a sharp change in moisture content.
Editor's summary: The above is the four commonly used solid wood flooring laying method solid wood floor laying construction pay attention to the six major steps of the relevant introduction, hope to help meet the needs of the friends! For more information, please continue to follow our website. Follow-up will present more exciting content. You can also purchase more of your favorite products on Qijia Mall!
Solid wood floor flooring
Base Oil,Cosmetic Carrier Oil,Castor Oil,Wheat Germ Oil
Jiangxi Global Natural Spice Co., Ltd. , https://www.chessentialoil.com