New House Wall Decoration Steps Which New House Wall Decoration Precautions

The wall is one of the more important structures in the house. If it is handled badly, it will affect the effect of the entire home, and it may also bring bad emotions. So what kind of process is the decoration of a new house ? It looks very simple, in fact, the steps are still quite a lot, the following may wish to look at Xiaobian for everyone to bring the new house wall decoration steps!

New house wall decoration steps

1. Inspection and treatment of the wall base

The first thing to do is to observe the surface of the surface and solve it according to the situation. If it is a rough cement, check whether it is smooth and solid enough. If there is a hollow phenomenon, if there is cracks, holes or empty drums, it should reflect with the developer. And ask for repairs; if it is a white wall, then in order to live in the long term, its quality is very important, test its water resistance, if the water resistance is not good, it is best to shovel out to do again, otherwise it will be skinned in the future.

2. Finished product protection

Whether it is the inspection of the surface or the protection of the finished product, it is an early stage of work. Although it is a preparation stage, it cannot be ignored. At this time, woodworking and floor tiles have entered the field and all need to be protected because dust, paint and other things are easy to fix. Items cause pollution.

3, sealing layer processing

That is, the grass-roots level is blocked, so that it can prevent dust or dust from becoming dense and increase the difficulty of construction. There are generally two methods. The first is for cracks, holes, and grooving, filled with gypsum products, and the other is For insulation walls, loose walls, and cracked walls, use kraft paper for solid sealing. Choose any one according to your situation.

4, thick screed treatment

Then leveling, if the surface of the wall outside the flatness is very poor, the difference> 5mm, then the proposed use of thick leveling, such construction only scrape once enough, but as thin as possible, too thick easily lead to cracking the wall later.

5, fine leveling processing

This process is carried out when the difference in flatness of the outer surface of the wall is less than 5mm. It usually needs to be scraped 2-3 times. It should be even and smooth. If it needs to be painted later, it should be sanded again with a fine sandpaper to make it smooth and flat. Brushed wall paint better.

6, brush primer

After being rubbed with thin sandpaper, the dust on the clean wall is treated, and then the paint on the underside is generally only required to be applied again. However, it needs to be 2-4 hours for it to be even and thoroughly dry, and then it can be carried out. step.

7, brush finish

Then paint the surface paint and apply it twice. After the first drying process, the next process can be carried out. It usually takes 2-4 hours. Of course, depending on the weather conditions, it takes 1-2 days to thoroughly dry the brush the second time. , The process should pay attention to dust, sun protection, waterproof.

8, acceptance

At the end of the day, the acceptance was checked. Qualified products should be flat, crack-free, pinhole free, uniform in color, and full of paint film.

Summary: The above is the new house wall decoration process that Xiao Bian brings to you today. I believe that my friends also have a certain understanding. We can learn about the decoration of the new house wall decoration. I hope this article can help you. .

Many different species of wood are fabricated into Wood Flooring in two primary forms: plank and parquet. Hardwoods are typically much more durable than softwoods. Reclaimed lumber has a unique appearance and is used in green building. Engineered hardwood has a thin solid wood layer on top with a composite core. It can be a less expensive option than buying hardwood.

Luli Group Co., Ltd, the company goal is to provide high-quality Flooring and environmentally-friendly products. We also use OSB because of its limited consumption of forest greenery.

Wood flooring we have:

1. Solid wood flooring:

Material: Poplar, eucalyptus, red oak, sapele, bintangor, rosewood, Bramante, teak, ribbed birch, black walnut, oak

Size: 910x122x18mm, 910x123x18mm, 910x127x18mm

Face: Uv lacquer 

2. Laminate OSB flooring:

Material: OSB

 Size: 910x122x18mm, 910x123x18mm, 910x127x18mm

 Face/Back: Melamine paper with wear-resisting layer

 Surface type: Soft finish, glossy finish, matte finish and so on

 Glue: MDI( Zero Formaldehyde)

Flooring

Wood Flooring,Waterproof Flooring,Plank Flooring,Vinyl Flooring

Luli Group Co.,Ltd. , https://www.cnluli.com