Lotus Lotus Management Method

Humidity management : like a humid climate, the relative air temperature of the growing environment is 70-80%, the relative humidity of the air is too low, the lower leaves are yellowed and shedding, and the upper leaves are dull.

Temperature management : Because it is native to the tropics and prefers high temperature and high humidity environment, the temperature requirement for winter is very strict. When the ambient temperature stops below 10 °C, it cannot be safely wintered when frost occurs.

In summer:

1. Strengthen air convection so that the temperature inside the body can be emitted;

2, placed in the semi-shade, or shade it 50%;

3. Give it a proper spray 2 to 3 times a day.

in the winter:

1. Move to a place where the light is bright indoors;

2, outdoors, can be wrapped with a film to winter, but every two days will be uncovered at a high temperature at noon to make it breathable;

Light management: like the semi-shade environment, you can give plenty of sunshine in the autumn, winter and spring, but more than 50% in the summer.

When placed indoors, try to place it in a place with bright light, such as a well-lit living room, bedroom, study, etc. After curing indoors for a period of time (about one month), it is necessary to move it to a place where there is shading outside (the winter has insulation conditions) for a period of time (about one month), so alternately exchanged.

Fertilizer management : For potted plants, in addition to the addition of organic fertilizer in the upper basin, in the usual maintenance process, proper fertilizer management should be carried out.

The three seasons of spring, summer and autumn are the peak seasons for its growth. The management of fertilizer and water is cycled according to the “Huabao” – Qingshui – “Huabao” – clear water, with an interval of about 1 to 4 days, sunny or hot. The interval period is shorter, and the interval between rainy days or low temperature periods is longer or not.

In the winter dormancy period, the main thing is to control the fertilizer and control the water. The management of the fertilizer and water is cycled according to the “Huabao” – Qingshui – Qingshui – “Huabao” – Qingshui – clear water, with an interval of about 3 ～. 7 days.

For plants planted in the ground, apply 2 to 4 times of fertilizer according to the drought conditions in spring and summer: firstly divide the small ditch from 30 to 100 mm outside the root and neck (the larger the plant, the farther away from the root and neck). The width and depth of the trench are 20 cm. Sprinkle 25 to 50 kg of organic fertilizer in the ditch, or 1 to 5 two-part compound fertilizer (fertilizer), and then pour water.

Before the spring, after the spring, fertilize again according to the above method, but do not need watering. In winter, when the plant enters a dormant or semi-dormant period, it is necessary to cut off thin, pest, dead, over-density and other branches. The branches can also be combined with cuttings. As long as it is cured, it will grow very quickly. When growing to a certain size, consider changing it to a larger basin to allow it to continue to grow vigorously.

Pest Management: Leaf spot and stem rot sometimes occur, sprayed with 70% thiophanate-methyl WP 1000 times. Insect pests are contaminated by whitefly and scale insects, which can be sprayed with 1000% dichlorvos EC.

External wall insulation decorative integration board is the external wall insulation system and exterior decoration system combined into one. It can effectively improve the user's return on investment, improve project quality. Reduce energy consumption, greatly shorten the external wall insulation and decoration project duration.
insulation Wall  board decorative  by the insulation layer, inorganic resin board, strong composite plastic, decorative coating composition, fire rating in full compliance with national fire inspection and acceptance standards.
External wall Insulation Decorative Board scope of application
Whether in the cold of the north, or the hot south, thermal insulation decorative panels integration effect can meet the national mandatory energy-saving regulations. The selected materials with high weather resistance, able to resist acid rain, salt spray erosion.
Exterior Wall Insulation Board decorative integration board for the new and old concrete, steel, brick wall, hollow brick wall, brick wall pressure block different, suitable for all types of wall construction and installation. At the same time, also suitable for the transformation of old houses. It has excellent outdoor weatherability, color retention, alkali resistance, water resistance, scrub resistance, cracking temperature change, waterproof, wear-resistant, collision-resistant, and durable tough film, adhesion, mold The effect is excellent.
Three external insulation system briefing
First, EPS board insulation coating finishes system
introduction:
EPS board thin plaster Exterior Insulation Board system is composed of dry powder, insulation board, alkali-proof fiberglass mesh cloth and finishes layer wall insulation and decorative features in one of the new wall insulation structure system, EPS board Thin plaster insulation system is the most common at home and abroad, the most technologically mature external insulation system. The system uses EPS board paste exterior insulation, with the overall insulation effect, thermal conductivity is small, does not destroy the insulation layer, cut off the hot and cold bridges, there is no condensation point, good durability and so on.
Application:
The system is suitable for the construction of new building exterior wall thermal insulation finishing projects with concrete walls, lightweight filling masonry, clay bricks and other materials as well as energy-saving renovation of existing buildings.
Second, XPS board insulation coating finishes system
introduction:
XPS board insulation wall panel system is composed of dry powder, interface agent, insulation board, alkali-proof fiberglass mesh cloth and finishes layer wall insulation and decorative features in one of the new wall insulation structure system, XPS board Exterior insulation has the overall effect of thermal insulation, thermal conductivity is small, cut off the generation of hot and cold bridges, there is no condensation point, good durability and so on. At the same time, the light weight of such systems can effectively reduce the load on the load-bearing walls outside the building and the foundation load, reducing the basic handling costs of seismic fortification. Such systems can be vigorously promoted and popularized building energy-saving insulation system.
Application:
The system is suitable for the construction of new building exterior wall thermal insulation finishing projects with concrete walls, lightweight filling masonry, clay bricks and other materials as well as energy-saving renovation of existing buildings.
Third, plastic powder polystyrene insulation coating system
introduction:
Adhesive polystyrene particles insulation coating veneer system is composed of premixed dry-mixed mortar as the main binder, adding appropriate anti-cracking fibers and a variety of additives to polystyrene foam particles as lightweight aggregate, the proportion of configuration, The use of on-site molding plastering process, the material is easy and easy to operate, the construction efficiency is high, the overall performance of the material after molding is good. Avoid block material insulation, easy to crack joints, the construction process is simple. The system insulation layer and the main wall of the close bonding between, no cavity, hollowing phenomenon, effectively solve the wall insulation, heat insulation, crack resistance, fire resistance, water repellency, weather resistance, ventilation and other issues.
Application:
The system is suitable for the construction of new building insulation wall panels external finishing projects with concrete walls, lightweight filling masonry, clay bricks and other materials as well as energy-saving renovation of existing buildings.

Exterior Insulation Board

Exterior Insulation Board,External Wall Insulation Boards,Exterior Wall Insulation Board,Internal Wall Insulation Board

UMS New Materials Industry Co.,LTD , http://www.ums-factory.com