Honeycomb Aluminum Seal Sealing and Injection Process

【China Aluminum Industry Network】 (1) Tear the folded edge of the honeycomb aluminum protective film and apply a textured paper at the edge of the 90° edge. The textured paper should be folded at a 90° angle at the four corners. The entire plate is beautiful. Once the pattern paper is in place, forcefully smooth it and avoid wrinkles on the masking paper.

(2) Fill foam sticks and require compact and straight.

(3) When the glue is injected, it should go straight, from top to bottom, from left to right, once.

(4) The squeegee should be glued in one step at a time, and the scraping speed at the corners is slightly slower.

(5) Tear off the textured paper and pull it at an angle of 45° from the outside. Tear off the textured paper to avoid environmental pollution.

For Auxiliary Chemicals series, we can supply many kinds of Auxiliary chemicals  with good quality, such as Initiator , Solvent , Dispersant, Emulsifier, Inhibitor , Regulator , Terminator, and so on.

We have our own production factories and lab. We can develop new product according to customer`s require, because we cooperate with several university, please believe that we have research advantage. Our factory is in chemical industry park, gets produce license from government, can supply product steadily.

Auxiliary Chemicals

Auxiliary Chemicals,Auxiliary Chemicals Initiator, Auxiliary Chemicals Solvent, Auxiliary Chemicals Dispersant, Auxiliary Chemicals Emulsifier,Auxiliary Chemicals Inhibitor, Auxiliary Chemicals Regulator,Auxiliary Chemicals Terminator

Jinan Yudong Technology Co., Ltd. , http://www.yudongchemical.com