What are the rules that should be paid attention to during the normal maintenance of the excavator?

Maintenance work is very important for mechanical equipment, but the maintenance requirements of the equipment are constantly increasing but the maintenance personnel's expertise has not kept up. As an operation and maintenance personnel, in order to better maintain the equipment in place, you should know more professional maintenance knowledge. Here are the details that should be paid attention to during the normal maintenance of the excavator.
1. In the case of harsh working conditions (sludge, weeds, clay, etc.), the debris should be cleaned in time to ensure the normal operation of the excavator, especially the engine is the main part, and there should be no debris around the engine. Normal heat dissipation of the engine.
2. Excavator excavation operations should use reasonable and standardized excavation actions to ensure the maximum excavation of the excavator, and also reduce the normal loss of structural parts.
3. After the excavator is started, the engine should be operated at low speed without load for a period of time (the length of time depends on the temperature). After the engine temperature is properly increased, the high-load excavation work is carried out.
4. When the excavator is working continuously for a long time, it should check each system for a certain period of time, especially the maintenance of structural parts, observe the need to lubricate everywhere, the grease needs to be added (recommended work 5-6 hours check added) .
5. Before excavation work, the various specifications of the excavator should be operated without load, and check for abnormal noise and abnormality.

Vulcanizing Agent is to make the rubber linear molecular into a three-dimensional network structure and mechanism through the vulcanizing agent for bridging, so significantly improved the rubber mechanical and physical properties. Ningbo Actmix produce a varierty of rubber vulcanizing agent, including S-80 Masterbatch, Non-sulfur odor curing agent CLD-80 can be substituted DTDM; AEM/ACM rubber vulcanizing agent HMDC-70 & TM-70(TCY-70); HVA-2 -75(PDM-75) is a Sulphur-free Vulcanization Agent, can be used for rubber cable, solve the copper wires due to exposure to sulfur vulcanzing agent generated black copper sulfide pollution problems.

Vulcanizing Agent

Vulcanizing Agent, Non-sulfur odor curing agent CLD-80, HVA-2, Vulcanizing agent for AEM/ACM, Sulphur-free Vulcanization Agent, S-80 Masterbatch

Ningbo Actmix Rubber Chemicals Co.,Ltd. (Ningbo Actmix Polymer Co.,Ltd.) , http://www.actmix-chemicals.com