![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
The way in which vitrified bricks are cut into the wall is:
1. Overall, the three-dimensional sense is stronger
Vitrified bricks.
2. After the cutting process, the lines are smooth and textured.
3. Vitrified bricks can be cut at will, the shape is changeable, and can be processed into various graphics and texts according to customer requirements. In the home cabinet, the space can be more common in the wall space, making the space harmonious and rich. Slotting, cutting and other split designs make the specifications change and the space is free to meet your individual needs.
4. The vitrified brick is simple and generous and has many sizes and specifications, and can be cut freely. Whether you need a large-area living room, or a small-area shop, you can bring you an unexpected overall effect.
5. The overall use of the cabinet, the bathroom and the living room can make the space better transition and echo the living room floor tiles, neat and uniform.
6. The advantages of vitrified bricks are that they are fired at a high temperature for a long time, and the whole body is vitrified, and the water absorption rate is less than 0.1%. No need to soak water in the process of paving, saving effort and effort.
7. The vitrified brick is polished during the processing and the surface is flat. Therefore, the vitrified brick is highly hydrophilic and more slippery when exposed to water.
8. Vitrified bricks can achieve the decorative effect of natural stone, but no natural stone harms the health of radiation. And it is easier to take care of in daily use. The grooving of vitrified bricks, because the processing of the grooves will produce shadows, so that the visual contrast with the light-colored bricks, so the slotting method of the light-colored bricks should not be complicated, but the dark bricks do not have such problems, through the size Different long strips or square mosaic cuts make the dark bricks less rigid, smart and elegant, used alone or matched with the same-tone light bricks, flexible and diverse. Since the bottom brick adopts the colored blank, there is no problem of chromatic aberration of the brick itself in the groove. Maintenance of the vitrified brick 1. In the decoration process and in daily use, the wall surface and the floor should be kept hygienic, and the surface dust should be cleaned frequently. And other contaminants 2, when paving the ground, it is best to prepare a small floor mat for the foot before the area, in order to remove the sand 3 attached to the sole of the guest, do not use hard objects to mark on it: try to avoid The hard object is dragged on the surface of the wall. During the paving process, the marble glue is strictly prohibited from adhering to the brick surface. If the adhesion should be removed in time, the corresponding cleaning agent should be used to avoid the dirt adhesion after a long time. 5 is recommended. How to maintain the vitrified tile wall for the month: Method 1: Use SN interface Adhesive, cement, yellow sand to blend into a paste at a ratio of 1:1:1, and then use a brush on the opposite side of the vitrified brick Brush a thin layer and then dry it, then apply the cement mortar to the wall in the usual way. Method 2: First use 801 glue (5-8% of the amount of cement) to mix the relatively pure pure cement slurry with a roller brush and brush the wall surface to be paved once. After drying for 24 hours, use cement mortar ( 1:1) Apply directly to the back of the brick body. If the cement mortar is mixed with 3-5% of 801 glue in the cement mortar, the effect will be better.
Polymer & Resin,Resin,Plastic Materials,Adhesive
Additives, Pigment, Dyes Co., Ltd. , http://www.nborganicpigment.com