Shower Room Cleaning and Maintenance

Shower enclosure is often the center of the bathroom deco, however, no matter how nice it is, the shower enclosure still has a tendency to get very dirty over the years if not properly clean and maintained.If you don't know how to clean it effectively, please follow the following steps for cleaning your shower enclosure in a right way.

1. Rinse the shower enclosure periodically by warm water. The glass should be cleaned regularly in order to maintain the finish of glass. Remember to mop the soap scum and water marks by soft cloth with a mild detergent, stubborn stains can be removed by a small amount of alcohol. Avoid using acidic and alkaline solvents, the waterproof bar should be taken down before cleaning. Its prominent part must be mounted on the inside of the door while replaced.

2. Correctly use and maintenance of wheels as follows:

a. Avoid colliding the sliding door from down part, so as to avoid the sliding door off.

b. Regularly fill in the lubrication on the wheel.

c. Adjust the sliding door periodically to ensure its effective bearing and smoothly sliding.

3. Maintenance of tempered glass and acrylic shower tray:

a. Do not use a hard object to beat or impact the glass surface, especially the corners.

b. Do not clean the glass by corrosive acid and alkali detergent in order to avoid damage the surface gloss.

c. Do not use wire to clean the glass surface to avoid scratches.

d. Prevent direct sunlight and insolation to the acrylic shower tray or acrylic bath tub.

4. Preventing glass blow:

The impact degrees and loading capacity of toughened safety glass is more than ten times than ordinary glass. While the external impact damage the glass, the small fragments were obtuse and won't damage the human body.The shortcoming of tempered glass is the careless destruction of a glass corner make the entire glass broken, but not only a part is broken like ordinary glass.During the production process, due to some factors, tempered glass is caused by the uneven pressure will make the glass shattered immediately, or even the glass is finished producing, the compressive stress of inside and outside is failed to average and not released completely, the glass would be broken too.On some external factors, such as in the installation of shower enclosure, the force is uneven and hard objects press on the top of glass, the broken phenomenon would be appear.

Keep attention of the following notes in order to prevent or reduce blew phenomenon:

a.If the wheels are loose or fall off, test by yourself or ask for professionals to test.

b.Do not hit the glass by sharp and hard object, especially the four sides and corners.

c.Frequently clean the track, remove at once if there are any things drop into the track in order to prevent unsmooth of the sliding door.

d.Ensure the wheels run smoothly, fill in necessary oil or lubrication if not smooth.

If you want to enjoy a comfortable and privacy shower time, keep cleaning and maintaining your shower enclosure at least once a week with the above steps.