Jiaju teaches you ten tips for acceptance of your new home

1. Whether the appearance and internal structure of the house is the same as the sales brochure and whether the door opening size is convenient for furniture access. 2. Whether the doors and windows are stable and sealed, and whether noise is generated during switching. 3, floor, wall, ceiling whether there are gaps, cracks, water stains, plaster is off. 4, visual, intercom system is normal. 5. Whether the switch can be switched freely or not, and whether there is power (Please use a pen test). 6. Whether the toilets, kitchens, smooth drainage, toilets, bathtubs are operating normally, whether there are cracks, less accessories 7, toilets, kitchen floor drain is enough (to prevent accidental outflow of water). 8, the size of the console, whether the streamlined use. 9, kitchen, toilet ground should be closed for 24 hours, check the downstairs ceiling and adjacent wall surface leakage. 10. Use the ruler to clearly measure the inside diameter of the famous house and record it carefully to facilitate the decoration design and purchase of furniture. You should do this carefully with all ten checks. Or ask you to find a good home decoration design network inspector to help free inspection. Acceptance, if found damaged, should be recorded and submitted to the seller for repair as soon as possible. Take photos for recording if necessary. Another point to remember is to replace the door lock after your stay.

Furniture Brand Villa Design Switch Furniture Toilet Decoration Design House Toilet Door

Formwork Accessories

Timber-beam Formwork

Timber Beam H20---cost-effective formwork girder

Formwork

With Timber beam & Plywood, the formwork is low weight but high load capacity, it is widely used in construction.

Flat Formwork

Characteristics:

Component with high standardization.

Assembling in site, flexible application.

Light weight, easy transportation and storage.

Single-side bracket

During single-sided concreting, the concrete pressure is transferred into the sub-structure by means of the single-side bracket.

Characteristics:

â—† For concrete heights up to 8.0m and a fresh concrete pressure up to a maximum of 60KN/m2.

â—† Good standard performance and versatility.

â—† Fast element coupling, all units can be quickly connected.

â—† The finished wall is excellent and absolutely waterproof.

â—† Optimized sizes for transportation.

Formwork Accessories,Concrete Formwork Accessories,Tie Rod Formwork Accessories,Aluminium Formwork Accessories

HENGSHUI PIONEER IMP & EXP TRADING CO ., LTD , https://www.hspioneer.com