![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
>>>Summary of ware purchase knowledge
For each family, sanitary ware is indispensable. Judging whether the sanitary ware brand is good or bad depends on the following aspects:
A look at the quality of the green body directly determines the water permeability of the ceramic.
At present, the firing process of ceramics has been greatly improved. Most brands, including some low-end brands, use high-temperature pottery fired at 800 degrees or more. In the early years, ceramic ware that used to be used in three to two years has become a mess. Already rare, now four or five hundred toilets do not have big problems for three or five years.
Editor's advice: But also high-temperature pottery, the difference in grades is also obvious. The length of the “high-temperature tunnel kiln†directly determines the texture of the ceramic. The longer the tunnel, the longer the time from heating to cooling the ceramic and the temperature change during firing. Small, the product is not easy to crack, resistance to quenching and hot heat is good; "high-temperature tunnel kiln" is short, the process from high temperature to cold sensation is short, and the burned ceramic texture is relatively brittle and easy to crack.
Secondly, the glaze glaze brand, the thickness of the glaze layer, and the firing process all directly determine the effect of the glazed sanitary ware. With imported glazes, the enamel-thick ware surface is flat and delicate, full of texture, crystal clear and looks very Comfortable.
Editor's advice: Glaze thick sanitary ware has strong self-cleaning ability and low water permeability. The sloping treatment is also applied to the sewer pipes of the middle-to-high grade sanitary ware and the inner wall of the water tank. This is very important to prevent the toilet from being dirty. However, this process is very difficult. The domestic brand is rarely available, and whether or not the sewer pipe is used for glazing is important. An important sign to determine the grade of sanitary ware.
Three to see accessories
The traditional copper water parts and floating ball irrigation have all been eliminated. At present, good water parts adopt imported PVC materials and vacuum irrigation technology, and the anti-corrosion and anti-rust performance and leak-proof performance are greatly improved.
Editor's advice: To match the three-dimensional style of the bathroom (three-piece bath, toilet, and washbasin) that you configure, you must also match the shape of the faucet and the surface coating treatment. The surface of the frame of the bathroom accessories is coated with a layer of plating. Nowadays, except for a small number of plastic plating, most of the products are polished copper and more chrome-plated. Most of the imported products are titanium alloys or copper chrome plating. The "colored surface" is crisp and exquisite, but it is more expensive. Some joint-venture brands or domestic brands have relatively affordable prices for copper chrome, while stainless steel chrome products have lower prices.
Four to see the overall shape
A good sanitary ware should not only be beautiful in appearance but also be ergonomic and comfortable to use.
Editor's advice: The manufacturer's mold, equipment, and design capabilities are the deciding factors. High-level manufacturers generally use imported molds.
Sanitary ware buy toilet faucet stainless steel
Corrugated Testing Equipment,Cardboard Puncture Tester,Crush Tester,Box Compression Strength Tester
Dongguan Hengke Automation Equipment Co., Ltd. , https://www.hengkeinstrument.com