HARDOX500 Sweden SSAB welding wear-resistant steel
"1" HARDOX 500 is a wear-resistant steel plate with a Brinell hardness of 500HB, which is mainly used in anti-wear conditions.
"2" HARDOX500 è€ç£¨ wear-resistant steel applications: crushers, sieve plates, feeders, feed funnels, hoists, blades, conveyors, buckets, blades, gears, sprockets, etc.
"3" HARDOX500 æ‚ wear-resistant steel is: "fine grained steel." Click on the image to change the big picture
"4" HARDOX500 æ‚ wear steel hardness: 4-32MM = 470-530HBW.32-80MM = 450-540HBW.
"5" HARDOX500 æ‚ wear steel mechanical properties: yield strength Re = 1400MPa. Tensile strength Rm = 1600 MPa. Elongation A5 = 10% (typical value of 20 mm thick steel plate).
"6" HARDOX500 æ‚ wear steel impact toughness: test temperature: -40 (-40F) °C. Impact energy Charpy-V longitudinal = 45J (typical value of 20 mm thick steel plate).
"7" HARDOX500 æ‚ wear-resistant steel delivery status: quenching.
"8" HARDOX 500 è€ç£¨ wear steel implementation standards: EN 10 204 - 3.1.
"9" HARDOX500 product application:
Because of its high hardness, high strength and high toughness, "10" is an ideal choice for those with severe wear and tear. The high wear resistance of the steel plate extends the service life of the dump truck body, the bucket of the excavator, the crusher and the like.
The hardness of the "11" steel plate is obtained by an effective quenching process on our water quenching line. This method achieves both higher hardness and lower alloy composition in the steel. The resulting wear plates are easy to machine, bend and weld.
H135
A type CPE performance
Mainly used as the impact resistant modifier of PVC. At present, it takes 95%
share of the impact resistant modifier market of domestic PVC. The additive
shares of H135 A type CPE as the impact resistant modifier of PVC profile
shapes is 9~ 12; the shares as the impact resistant modifier of PVC water
feeding pipe and other liquid transfer pipe under pressure is 4~ 6; this can
effectively improve the low temperature resistant impact property of PVC
product. In addition, H135A type CPE is widely added into the products including
PVC plate, sheet, calcium-plastic box, case of household appliances and
electrical appliance fittings to improve the mechanical property and electrical
property.
H135 A type CPE can be compatible and use with most plastics and rubbers
simultaneously. The polymer cross blend system with bad compatibility can take
CPE as bulk filler. The rubbers used together with CPE include caoutchouc,
butadiene styrene rubber, ethylene propylene diene copolymer, polyurethane
rubber, acrylonitrile butadiene rubber, neoprene and chlorosulfonated
polyethylene etc. The plastics used together with CPE include PVC, PE, PP, EVA
and PA etc, which greatly improve the low temperature resistant impact property
and increase flame resistance, oil and aging resistance, corrosion resistance
and insulatibity. This can make the plastic product have high filling property
and reduce production cost.
Packing and Storage :
PP bags with PE film inside, Net Weight of 25 ± 0.2kg per bag ; as the viscoelastic and water absorption of CPE resin are strong, this product shall be stored in the dry and ventilated warehouse with stack height no more than 10 bags and avoid solarization, damp and takes strict precautions again stress. It is not dangerous cargo.
CPE
Polyethylene Film,Chlorinated Polyethylene,Polyethylene Resins,CPE Plastic Sheet
Shandong Gaoxin Chemical Co.,Ltd , http://www.gaoxinchem.com