Wind power bearing parts removal process

Source: China Bearing Network Time: 2012-12-30

/*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089';

1. Forging blanks view 2. Rough car 3. Rough aging 4. Finished car 5. Unique technology for forming the inner ring of the three-row roller turret bearing: in order to avoid the deformation after the heat treatment of the inner ring of the three-row roller slewing bearing. It is necessary to carry out the pair processing in the turning process; that is, the back-to-back processing of the raceway; No interception is carried out before disposal;
6. Heat treatment of the raceway surface quenching (sometimes customers need carburizing, nitriding, carbonitriding, etc.)
And tempering after quenching 7 . Rolling and milling machining 8. Drilling time can be used for blue, phosphating, vulcanization, etc. according to customer requirements. Grinding can be divided into rough grinding and fine grinding. Part inspection 11. Demagnetization, cleaning, installation, exterior coating anti-rust oil, filling grease, sealing nozzle, packaging (plastic film inner layer, kraft paper intermediate layer, nylon plastic belt around the outer layer).

Recommend to friends comments close window

Bearing related knowledge

The common terminology of the bearing parts of the bearing on the automobile and the general application of the tapered roller bearing, the first applicable cage and the new plating process of the anti-friction layer of the sliding bearing (1)
Replace the lower bearing of the door machine with the jacking method (3)

This article links to http://
Please indicate the bearing network http://

Previous:The factors affecting the oscillation of the oscillating screen rolling bearing Next edition: The details of the bearing defects in the use of the bearing

Others Humate

Humic Acid Fertilizer,Potassium Humate,Sodium Humic

Lower Blood Pressure Co., Ltd. , http://www.bjorganicfertilizer.com