Seven Mistakes Must Be Known in the Purchase of Solid Wood Doors


Maxim Steelwood Interior Door     The Wardrobe Wardrobe Sliding Door

1, shop around, choose cheaper

"Wooden doors are not the same as other goods. Consumers can only see the surface of the door, and their internal quality cannot be judged. Even if it is an expert, it is sometimes difficult to judge the interior of the wooden door simply by observing the appearance. It is recommended that consumers do not only The price on the map is cheap, and the inner quality of the product is neglected.The environmental performance of the door is extremely critical. “It is better for consumers to buy a cheap solid wood composite door than to choose your expensive paint-free door, so that the environmental performance is more secure. ”

2, buy a door to buy solid wood doors

“Chinese people often love wood products for ten minutes, but they ignore the natural properties of wood.” The stability of solid wood doors is not strong, and it is more likely than other types of doors to produce door body deformation, fissures at the joints, and surface cracking. In fact, the performance of solid wood composite doors with good environmental performance is not worse than that of solid wood doors, and even stability is better than solid wood doors.

3, the heavier the door, the more solid wood doors

"Single weight cannot judge the inner quality of the product." The weight of the particle board sometimes sinks compared to solid wood panels. "Although the material used to make the chipboard uses broken wood chips, many adhesives are applied during the production process. After curing, it occupies a considerable part of the board, resulting in a lighter weight.” In addition, due to the different size and thickness of the door leaf and the filling of the door core, the weight of the wooden door is also different. Therefore, the specific weight is not the most reasonable basis for judgment.

4, only concerned about the door, do not care about the door

When consumers choose wooden doors, they usually only pay attention to the quality of the doors. However, there are actually many post-sale problems in the wooden doors that come from the door. There are three kinds of solid wood multi-layer door covers, density door covers and solid wood door covers on the market. MDF door cover waterproof moisture performance and nail holding power are relatively poor, easy to cause the phenomenon of sinking and scratching the wood door; etc.; solid wood door cover is generally more teeth wood, screw screw is easy to form a phenomenon. She pointed out that the best choice for solid wood composite doors is the standard solid wood multi-layer door covers, which can guarantee the service life of wooden doors.

5, determine the door core material through the door lock hole

Some "smart" consumers observed that the wooden door locks were installed on site. "Why don't you keep the hole in the door to see the core of the wooden door you purchased?" However, in the current manufacturing process of wooden doors in the market, in order to make the lock more firm after installation, the strength of the door lock hole retention area will be strengthened, and the practice of lining the lining material is mostly adopted. Therefore, the door is inspected through the door lock hole. Core material is not very realistic.

6, wooden cracks that require return

“From the perspective of protecting the environment and saving resources, it is suggested that there are problems with the wooden door products, which are mainly based on maintenance.” The appearance of subtle cracks in paint doors is a normal phenomenon. "Wood has the properties of shrinking and swelling, which is a natural defect of wood. Since ancient times, this problem has been very difficult to overcome. Nowadays, technical means can only minimize the occurrence of cracks, but it is impossible to eradicate it completely." Cracks can be completely resolved through maintenance. Returning to the factory is not the only way to repair. Some minor problems can be repaired at the consumer's home. At the same time, the "Wooden Door Repair, Replacement, and Return Specifications" will be introduced next year, and the specifications will require the doors in more detail to be repaired, replaced or returned.

7, never allow color difference

Consumer complaints currently received by the Association are partly focused on color aberrations. “The problem of chromatic aberration cannot be completely avoided. For example, the unpainted door of the same suit may have different colors due to the different batches of coated materials, which may cause the colors to appear in the stores and the The home is a little different, especially in solid wood-covered paint doors, where the wood veneer is drawn from different parts, the age of the wood, and the color of the cut out pattern is not quite the same, “the same is black walnut, and some may be dark Depending on the nature of the wood, the lightness may be caused. The difference in the number of paint passes and the difference in the color of each paint may cause the colors to deviate slightly, so consumers should not be over-satisfied with the wooden doors. ”

Doors to buy wooden door brand three trees paint wooden door paint door prices steel wood interior doors

Other Chemicals

Pearlescent Masterbatch Co., Ltd. , http://www.nsmasterbatch.com

Posted on