High Pressure Solid Stream Paper Cutting Nozzle, Solid Stream Nozzle

Paper making solid stream nozzle design features:
This kind of cutting nozzle is used for the trimming of the paper that supply a precise,clean cut.
It can produce a straight needle solid stream.
It can work at high pressure of 140bar.
The cutting nozzle orifice material we have the SS316 and ceramic.    
Material description:  Nozzle main body for the brass material, filter for stainless steel materials, the nozzle for ceramic inlay.







 

Power Loads

NANSHAN Caliber Powder Loads of low velocity can be used for the powder actuated tools of

NANSHAN®, POWERS®, RAMSET®, HILTI®, SIMPSON® and BLUE POINT FASTENERS®.

HIGH QUALITY AND DEPENDABILITY

NANSHAN powder loads and tools match tolerances to provide optimum power within recognized national velocity standards. Available in color coded single shot, 10 shot strips and 10 shot discs.

Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by the national law. Failure to use properly can result in serious injury or death to users or bystanders.

Advantages Powder Guide

Power level is designated by the load level number marked on each box; also by the color of the box and each powder load. As the number increases, the power level increases.

Powder Loads,Powder Actuated Loads,Powder Loads For Actuated Fasteners,Powers Powder Loads

Sichuan Nanshan Powder Actuated Fastening System Co., Ltd. , https://www.nanshanpat.com