![<?echo $_SERVER['SERVER_NAME'];?>](/template/twentyseventeen/skin/images/header.jpg)
For bathroom and bathroom renovation, how to reflect its comfort and safety has become a focus of decoration. The person in the home improvement industry pointed out that the details of the decoration of the bathroom are involved in home decoration. If not handled properly, it will not only directly affect the quality of future home life, but will also affect the mood.
Kabei Hardware    Guardian Infinity Hardware    Aopu kitchen ceiling
1. Ceiling: Because the water vapor in the bathroom is heavy, it is necessary to choose materials that are waterproof, antiseptic, and rust-proof.
2, the ground: in the paving tiles before, be sure to do a good job of waterproofing; after the tile is laid, to ensure that the brick surface has a drain slope (usually about 1% is appropriate), the slope toward the floor drain; the ground must be done after laying tiles Closed water experiment, the time must be guaranteed at least 24 hours; laying tiles should pay attention to the seams and alignment of the wall tiles, to ensure the overall sense of the entire bathroom, so as not to produce a visually cluttered impression.
3. Wall: The tiles on the wall should also be waterproof and waterproof. Also, the tiles should be flat and must be aligned with the floor tiles to ensure the integrity of the wall and the floor. The incision of the tile should be small and appropriate, and the flange cover on the water feeder should be convenient to cover the incision, making the appearance perfect.
4, doors and windows: the best bathroom with windows to facilitate ventilation; if there is no window, with particular attention to the details of the door. In order to prevent the water in the bathroom from overflowing, the door should be slightly higher than the inner side of the bathroom; the gap between the door and the floor of the bathroom should be kept a little larger to facilitate the return; if it is a sliding door, but also in the sliding door and bathroom Make a waterproof layer between the tiles.
5. Circuit laying: The wire joints of the bathroom must be tin-plated and must be wrapped with waterproof tape and insulating tape successively to ensure safety; the wire body must be covered with flame-retardant tubes; all switches and sockets must have a moisture-proof box, and the position Also depending on the size and location of the appliance, to ensure the use of convenient and reasonable.
6, waterway renovation: Bathroom water supply and drainage line is best not to make too much changes, if you want to change, depending on the specific circumstances, such as washing machine model, the location of the water will be different.
7, sanitary ware installation: the best in the decoration before the water hole distance, according to the size of the selected bath, bath room, toilet, wash basin and other sanitary ware, so as not to fit in the size of the decoration is inappropriate; toilet seat installation should be used first The mud is sealed and then fixed with expansion screws or glass glue so that it can be easily repaired when the toilet is clogged.
8. Ventilation: There must be an exhaust fan in the bathroom, and the exhaust fan must be provided with a retrograde gate to prevent backflow of dirty air.
9. Greening: Adding anger. The bathroom should not be a corner forgotten by the green. When decorating, you can choose some shade-resistant, hi-potted pots to be placed in the bathroom, making it a little more angry.
Sanitary ware bathroom fitting company Window glass switch Home renovation Socket kitchen ceiling glass brick glass sliding door glass door bathroom sliding door bathroom tile bathroom door bathroom ceiling material bathroom wall tile bathroom door size bathroom size bathroom ceiling bathroom wash basin whole bathroom toilet waterproof bathroom floor tile Tile adhesive
The globe valve is used to cut off the flow of the medium. The globe valve is suitable for frequently opened occasions. The sealing parts of the globe valve are the disc and the valve seat. In order to make the globe valve close tightly, the mating surface of the disc and the valve seat should be grinding or using gaskets. The sealing surface can also be inset with bronze, stainless steel and other corrosion-resistant and wear-resistant materials. The disc and stem of the globe valve are connected with each other, so that the disc and stem are closely fitted. The lifting of the disc of the globe valve is generally controlled by the stem. The upper part of the stem of the globe valve is the handwheel, and the middle part is the thread and packing sealing section. The role of the packing is to prevent the internal medium of the valve body from leaking along the stem.
Globe Valve,Globe Control Valve,Globe Valve Types,Flanged Globe Valve
WUXI KVC-VALVE , https://www.kvgatevalve.com