Method for storing different pesticides

1. Liquid pesticides <br> Pay attention to heat insulation and sun protection, avoid high temperature and contact with air; keep away from fire source and prevent contact with oxidation and alkaline substances. It should be placed in a place that is ventilated and protected from light, cool and dry, and not with nitrates, strong acids, etc. Put together organic matter such as charcoal and paper scraps. Bottle caps and stoppers of bottled pesticides must be tightly closed to prevent volatility and decomposition. Some pesticides have their own characteristics, such as phoxim and trifluralin. Do not mix with alkaline substances when storing. Bottled liquid pesticides tend to freeze when they are below 0 °C, form a block or freeze the bottle, preferably with rice husks and other materials to keep warm.

Second, solid pesticides such pesticides mainly pay attention to moisture and moisture, with wooden boards or dried chaff, wheat straw, straw, etc., and pay attention to ventilation and moisture. Do not store aerosols with volatile, flammable or explosive materials. Do not exceed 30 °C.

Third, micro-biological pesticides <br> in cool, dry environment preservation, high temperature anti-humidity, storage time should not exceed 2 years.

NPT hose end Fitting Threads: NPT threads fittings are your traditional tapered thread fittings and have been used for 100 years. They are available in low-pressure black iron and brass, and high-pressure steel and stainless. This connection style is used in pneumatic and process systems, and lower-pressure hydraulic systems.  ORFS tube fittings system consists of ORFS Male fitting with O Ring in Face, which seals against Flat Seated ORFS Female Swivel Nut fitting.

American Hydraulic Fitting inculde:           

JIC Hydraulic Fittings                                                                                         

NPT Hose Fittings                                                                                    

ORFS Hydraulic Hose Fittings                                                                                

JIC 37° Fitting: The Joint Industrial Conference (JIC) fitting is the most common hydraulic connection style. It consists of parallel threads and a 37° cone on the fitting end that attaches to either a flared tube or hose fitting.                            

American Hydraulic Fitting

American Hydraulic Fitting,SAE Hydraulic Fittings,SAE Flange,Hydraulic Hoses And Fittings

SHIJIAZHUANG TOPA TRADING CO., LTD. , http://www.topahydraulic.com