How to properly maintain the fire service life?

Fire protection clothing is a protective clothing worn by firefighters and high-temperature workers during near-fire operations. It is used to provide thermal protection to the upper and lower torso, head, hands and feet, including fireproof jackets, fireproof pants, fireproof hoods, and fireproof gloves. And fireproof feet. With fire, heat insulation, wear resistance, folding resistance, flame retardant, anti-radiation heat and other characteristics, anti-radiation heat temperature up to 1000 °C. Fireproof clothing needs flame-retardant fabric laminated aluminum foil, flame-retardant fabrics are mainly two kinds of cotton flame-retardant twill yam card, a C/N cotton-cotton flame-retardant cloth, after laminating aluminum foil, both have good resistance The burning performance, the outer layer of aluminum foil can also play a good anti-heat radiation function. Applicable to fire, chemical, petroleum, electric power, steel, machinery, food, electronics, mining industry and other industries.

Fire protection service methods:

1. After each use, take a look at the condition of the fire protective clothing and focus on checking for wear.

2, if you want to remove the residual dirt on the fireproof clothing, use tap water and neutral soap, if necessary, detergent. Use detergent only in the contaminated site, be careful, because the detergent may damage the aluminized surface.

3. If the fire-retardant suit is in contact with chemicals, or if there is a phenomenon of air bubbles, the entire aluminum-plated surface should be cleaned. If there is oil or grease residue left on the fireproof clothing, use neutral soap for cleaning.

4, fireproof clothing must be thoroughly dried before re-storage, it is best not to fold.

5, if the surface of the fireproof clothing is not a very serious burn marks or wear on a small area, you can use aluminum spray gun repair. If the exterior of the fire service suit is damaged, replace the fire service suit.